Monster Isport Bluetooth Wireless Super Slim User Manual
Important Monster® Performance and Safety Tips
Listen Responsibly
To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in / on your ears, gradually turn up the volume until you reach a comfortable listening level.
Noise levels are measured in decibels (dB), exposure to any noise at or above 85 dB can cause gradual hearing loss. Monitor your use; hearing loss is a function of loudness versus time. The louder it is, the less time you can be exposed to it. The softer it is, the more time you can listen to it. This decibel (dB) table compares some common sounds and shows how they rank in potential harm to hearing. Get the most out of your equipment and enjoy great audio performance even at safe levels. Our headphones will allow you to hear more details at lower volume levels than ever before. Learn how to establish a safe listening level and review other important safety guidelines from the Consumer Electronics Association at www.ce.org. Important information on how to prevent Noise- Induced Hearing Loss (NIHL) and a comprehensive list of which noises can cause damage can be found on the Deafness Research Foundation’s website, www.drf.org.
Use Responsibly
Do not use headphones when it’s unsafe to do so – while operating a vehicle, riding a bike, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required. It‘s dangerous to drive while wearing headphones, and in many places, illegal because it decreases your chances of hearing life-saving sounds outside of your vehicle, such as another car’s horn and emergency vehicle sirens. Please avoid wearing your headphones while driving. Use one of Monster’s FM transmitters to listen to your mobile media devices instead.
Headphones “Break-in”
Break in time for headphones? We’re kidding, right? No we’re not. Like any high performance product, whether it’s cars or headphones, they’re mechanical devices that settle in after use. Your new headphones will sound incredible out of the box, but will “mellow” out after use and sound even better. We recommend playing them for 8 hours. After 20 hours of playing, they should be fully broken in. Enjoy.
Battery
If applicable, battery must be recycled or disposed of properly.
Information to consumers in application of EU WEEE Directive 96/2002
This product is subject to European Union regulations that promote the re-use and recycling of used electrical and electronic equipment. This product required the extraction and use of natural resources and may contain hazardous substances. The symbol above, on the product or on its packaging, indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the store from which you purchased the product. For more information about Monster products, please visit us at: www.MonsterProducts.com.
Monster® Service Have a Problem with Your Headphones? Our Customer Service Team is here for you.
Please don’t return headphones to your retailer, CALL our customer service center, 1-877-800-8989 for United States or Latin America, or email us at www.MonsterProducts.com/service/. For Canadian, European, and Asian Pacific customer service numbers, please see the “Telephone Numbers” section in the following “Limited Warranty for Consumers”. Our team of experts will assist you with all questions and technical difficulties. We stand behind our products. Monster headphones deliver the best in sound, quality, and design. Thank you for your purchase.
Download the complete manual at:
Product Overview
- Indicator light
- Charge jack
- Volume + / Track Forward
- Multifunction button (Power On/Off, Pairing, Activate Voice Dialing)
- Volume – / Track Backward
- Microphone
Guide to Indicator Lights
Basic operation
Charge the Battery
Your iSport® Wireless SuperSlim initially has enough power to complete the pairing and a few calls. When battery is low, you will hear warning tone and indicator light changes to red. The headphone includes a Micro USB cable that can be connected to your computer or other device made for USB charging. Plug the Micro USB end of the included USB cable into the USB micro port charger connector on the right channel side of the headphone. Plug the other end into a USB port on your computer or other devices made for USB charging. The indicator light will be blue while charging. Once fully charged, the indicator light will be off. Charge time is approximately 1.5 hours on an empty battery.
Note: The lifetime of the battery will be significantly reduced if your headphone is left uncharged for a long period. We recommend that you recharge your headphone at least once a month.
Power On/ Power Off
Press the Multifunction button for about 1 second to power on the headphone. To power off the headphone, press the Multifunction button for about 3 seconds.
Volume Control
Press the Volume “+” or “-” to turn volume up or down, you hear beep once you reach the maximum volume or minimum volume.
Pairing
Pair One Phone
- Press and hold the Multifunction button for about 5 seconds until indicator light flashes blue and red alternately, you hear “Power on” and pairing tone. Now headphone is in pairing mode.
- Activate Bluetooth® on your phone and set it to search for new devices.
- Select “iSport Wireless Superslim”. If your phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The indicator light stops flashing red and blue once successfully paired, you hear “Paired, phone 1 connected”. Some phone list an option to “Play through earphone”, select to use the headphone.
Note: When you unbox the headphone and power it on for the first time, it will enter to pairing mode automatically.
Pair Another Phone
Multipoint technology enables you to pair another phone and take a call from either. To pair with another mobile phone, power off the headphone, then follow the steps for “Pair one phone”. After pairing successfully, restart the headphone to connect to 2 paired mobile phone automatically and manually.
Note: You may need to connect the second phone manually.
Call
Answer a Call: Press the Multifunction button once.
Reject a Call: Press and hold the Multifunction button for about 1 second.
End a Call: Press the Multifunction button once.
Redial the Last Call: Press Volume”+” and “-” for about 3 seconds in standby mode. The mobile phone will redial the last call number.
Mute On/Off: Press the Volume “-” for about
3 seconds to mute on/off.
Switch Between the Headphone and Phone: Press the Multifunction button for about 1 second during a call, the call will be switched to the mobile phone, redo this operation again, the call will be switched to the headphone.
End Current Call and Answer New Call: When a new call rings during a call, press the Multifunction button once to answer new call and end current call simultaneously.
On Hold Current Call and Answer New Call: When a new call rings during a call, double press the Multifunction button to hold current call and answer new call. To switch between held call and active call, double press the Multifunction button.
Activate Voice Dialing: Double press the Multifunction button to trigger the voice dialer, this function varies with user’s smartphone.
Music
Play / Pause Music: Press Multifunction button once to play / pause music. (Some phones may require you to start a media player first).
Track Back / Forward: Press the Volume “-” for 1 second once to skip track backward, press Volume “+” for 1 second once to skip track forward.
Switch Music and Call: When a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed.
More Features
Battery Indicator
When the headphone is connected to a device with iOS system, a battery indicator will appear at the upper right of the system, indicating battery status of the headphone.
Auto Power-Off
When the distance between the headphone and the mobile phone is beyond effective range, a warning tone will be alerted and headphone will try to reconnect with the mobile phone for 10 minutes. If no phone is reconnected within 10 minutes, the headphone will go to connectable mode and wait for 5 more minutes before automatically power off. Automatic Connection After
Powering On
When the headphone and phone have been paired once, they will automatically connect when the headphone is on and Bluetooth is activated on the phone.
Connection Standby
After successful pairing and connection, you will hear the voice prompt “Phone 1 connected”. The headphone will be in turning on mode or standby mode automatically and the blue LED will flash once every 5 seconds. When the phone disconnects the headphone, you will hear the disconnect tone.
Reset Paired Device(s)
Go to the Pairing mode (hold the Multifunction button for 5 seconds from Power off state), then hold the Volume “-” to reset the paired device(s), indicator light flashes blue and red alternatively and rapidly few times, you will also hear the tone.
Hardware Reset
Plug the Micro USB cable into the USB micro port of headphone to connect it to the computer or other device made for USB charging to have the hardware reset.
Certification
FCC ID: RJE190653
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modification not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. The socket-outlet shall be installed near the equipment and shall be easily accessible.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s (or your) authority to operate
the equipment. Avoid storage in extreme heat or cold. Avoid exposure to liquids, temperature extremes and high humidity. The product’s working temperature range is 0–45°C (32–113°F). This device complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.
LIMITED WARRANTY FOR CONSUMERS
Monster, LLC, 7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA, [PLEASE NOTE THAT MONSTER DOES NOT ACCEPT PRODUCTS SHIPPED TO THIS ADDRESS – FOLLOW INSTRUCTIONS IN “HOW TO MAKE A CLAIM” BELOW] (415) 840-2000 (“Monster”) extends You this Limited Warranty. Statutory or common law may provide You with additional rights or remedies, which shall not be affected by this Limited Warranty.
DOWNLOAD PDF LINK
d5478b588c0b11a8dad0d93e473b279802ff09235ffe1b47cc3d84e9f788f4ff_optim
