Ion Audio Pro Glow Express User Manual
IONAUDIO.COM/SUPPORT
For articles, videos, phone and web support
Package Contents:
- PRO GLOW™ EXPRESS
- IEC320 C13 Power Cable (5 ft / 150 cm)
- Microphone with Cable (8.2 ft / 250 cm)
- Quickstart Guide
GETTING STARTED
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
- SIGN UP FOR THE NEWSLETTER
PLUG IN AND POWER ON
ION SOUND CONTROL™ APP
Connect to the ION SOUND CONTROL™ App for a more dynamic experience:
- a. Connect the phone to the speaker via Bluetooth® (Step 4)
- b. Download the App from the Apple App Store or Google Play Store
- c. Open the Ann on vour device.
CREATE YOUR SOUND EXPERIENCE
BLUETOOTH
- When first powering on, the speaker will enter Bluetooth mode; otherwise, press SOURCE until the display shows “bLUE”,
- Choose “PRO GLOW EXPRESS” in your Bluetooth settings menu.
- Press Play in the music player App of choice on the device.
- Make sure the device volume is turned up.
AUX IN
- Press the SOURCE button on the product or select AUX in the App.
- Plug any sound source into the AUX input with a 1/8″ cable (not included).
- Make sure the source device volume is turned up.
MIC INPUT
- Plug the mic into the MIC input and turn the MIC switch to ON.
USB PLAYBACK
- Insert a USB drive (not included) with MP3 files on it (16 GB max).
- Press the SOURCE button on the product or select USB in the App.
- Press PLAY/PAUSE and </> to control tracks.
- Press the REPEAT button to choose playback mode (see User Guide).
CUSTOMIZE YOUR SOUND EXPERIENCE
CONTROL KNOB
- Rotate to adjust the overall Main Volume (all channels).
- Push to select MIC to adjust MIC Input Volume.
Push to select SOURCE to adjust Bluetooth, Aux, or USB volume. - Push to select ECHO to adjust the echo effect on the mic.
- Push to select LOW or HIGH to adjust EQ settings.
LIGHT MODES
- Press the LIGHTS button or use the App to cycle through five light modes, or to turn the lights off.
STEREO-LINK™
- See the User Guide or App for link instructions to connect to another PRO GLOW™ EXPRESS.
Important:
To ensure stability if mounting the speaker on a stand, fully tighten the speaker mounting knob to secure it to the pole.
Important Safety Instructions (English)
- Read and keep these instructions. Heed all warnings and followed all Instructions.
- Warning (if applicable): Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.
- Clean only with a dry cloth.
- Water and Moisture (if applicable): Do not use this apparatus near water. Electrical equipment should NEVER be kept or stored in damp environments.
- (If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- (If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
Continued
- (If applicable) Be careful not to damage the power cord.
- Only use attachments/accessories specified by the manufacturer.
- (If applicable) Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
- Do not attempt to alter this yourself.
NOTICE CONCERNING FCC REGULATIONS:
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- (a) reorient or relocate the receiving antenna;
- (b) move this unit;
- (c) increase the separation between the equipment and receiver;
- (d) be sure that all cables are properly shielded, using a choke or ferrite where appropriate; or
- (e) consult the dealer or an experienced radio/television technician for help.
REFERENCE LINK
https://www.ionaudio.com/pro-glow-express