Pyle Audio 2-Channel Amplifier User Manual

Pyle Audio 2-Channel Amplifier User Manual

About

WATERPROOF AND WEATHERPROOF: The sound amplifier is waterproof with marine-grade protection. It includes the construction and integration of the energy used to control the air and the power 400 watts: This receiver is powerful with a maximum power of 400 watts. The anti-thump feature is on and off to save energy. Features 2 to 4-ohm speaker impedance and adjustable volume control 2-Channel Amplifier: Pyle’s PLMRMP1B_0 is designed as a 2-channel marine amplifier to power any marine stereo speaker and is also universally applicable.

Features wired RCA, AUX, and MP3 audio inputs Short Circuit Protection: Built-in heavy-duty heatsink, thermal overload speaker short circuit protection to protect the amplifier and vehicle electronics from short circuit conditions. Has 10A fuse Compact and Lightweight: This amplifier is compact, measuring exactly 4.13″ L x 3.35″ W x 1.38″ H and weighing just 1.89 lb. 10Hz – 40kHz frequency response.

What’s in the Box:

• Preamplifier Receiver
• Remote Control
• Detachable Rack Mount Brackets
• RCA Connection Cable
• AM + FM Antennas
• Power Cable

Installation Precautions

Before you drill or cut any holes, investigate your vessel’s layout very carefully. Take special care when you work near the gas tank, fuel lines, hydraulic lines, and electrical wiring. Never operate the amplifier when it is unmounted. Attach all audio system components securely within the amplifier to prevent damage, especially in an accident. Do not mount this amplifier so that wire connections are unprotected, in a pinched condition, in contact with any metal surfaces in your marine vessel, or likely to be damaged by nearby objects. Before making or breaking power connections in your system, disconnect the marine vessel battery. Confirm that your head unit or other equipment is turned off while connecting the input jacks and speaker terminals.

Power and Speaker Wiring

Wire Color
Red
Black
Blue
White
White/Black
Gray
Gray/Black
Green
Green/Black Purple Purple/Black

Description
Battery (+), 12dc
Barrery (-), Ground
Remote Turn On, 12vdc = ON CH1 (+)
CH1 (-)
CH2 (+)
CH2 (-)
CH3 (+)
CH3 (-)
CH4 (+)
CH4 (-)

If you need to replace the power fuse, replace it only with a fuse identical to that supplied with the amplifier, Using a fuse of a different type or rating may result in damage to your audio system or your amplifier which is not covered by the manufacturer’s warranty.
Don’t misuse the level of control! Do not mistake the input level control for volume control! It is designed ONLY to match the output level of your audio source to the input level of your amplifier. Do not adjust this input level to maximum unless your input level requires it. Ignoring these instructions will result in an input overload to the amplifier and excessive audio distortion. It can also cause the protection circuit to engage

Controls, Input, and Output Cables:

The switches and gain settings are located behind a watertight plug, which also lights up when the amplifier is on. Be sure to replace the plug when finished with adjustments.

1. The INPUT LEVEL switch selects the input sensitivity of the amplifier. If you are connecting to a LINE-level source (typically any RCA-type connection) then the switch should be in the LINE (out) position. When connecting to loudspeaker outputs or headphones or high-level sources then set the switch to the SPEAKER (in) position.
2. The POLARITY switch allows the user to optimize bass performance in the case that there is more than 1 set of loudspeakers producing bass in the system. Play some music with strong bass content and listen with the switch alternately in the NORMAL and REVERSE positions until it can be determined which setting results in a more pleasing bass response.
   If in doubt, or if any interaction with other speakers is unlikely, then leave the switch in the NORMAL position.
3. The GAIN control adjusts the overall level of the amplifier. When using the amplifier without volume control the level should be set to achieve a balance with other loudspeakers in the system. As a rule, keep the gain setting as low as possible while still insuring that the system will reach full output power. When using the system with external volume control, set the external Volume Control to FULL (clockwise) and adjust the gain on the amplifier until full output power is reached. The full output power level can be determined by turning the gain control clockwise until the apparent loudness does not appear to increase anymore. Leave the control at the setting where this begins to become apparent.
4. VOLUME CONTROL Plug for the waterproof remote volume control. When installed, this control will turn off the Marine Amplifier Kits when turned all the way down.
5.  INPUT Stereo RCA audio input for connecting other audio devices.
   1.  To Connect Bluetooth
      Turn on the amplifier, the red Bluetooth indicator LED keeps blinking at this moment.
   2.  Look for the “Bluetooth” function in your phone setting and open it.
   3.  Search the Bluetooth device which is a “Pyle amplifier”. After you connect the Bluetooth successfully, the red Bluetooth indicator LED will stay on.
      Bluetooth Version: 3.0

Only models PLMRMB4CW and PLMRMB4CB feature built-in Bluetooth.

Technical Specs:

• MAX Output Power: 3000 Watt
• 300 Watts x 2 @ 8 Ohm
• 550 Watts x 2 @ 4 Ohm
• 800 Watts x 2 @ 2 Ohm
• Impedance: 8 Ohm
• Aspect Ratio: 4:3/16:9
• Video System: PAL/NTSC
• Audio S/N Ratio: >90dB
• Frequency Range: +/-14 dB
• Integrated IC Radio Tuner
• CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RW/MP4
• Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Not Included
• Power Cable Length: 4.9’ ft.
• Power: 110/220 Volt Switchable
• Dimensions (L x W x H): 16.9” x 14.6” x 5.7” -inches

 Description

Pyle home theater receivers provide a wide variety of audio and video entertainment. High-power stereo preamp performance loaded with playback via front CD/DVD player, AM/FM tuner, USB and SD flash memory reader, aux (3.5mm) inputs, and two 1/4″ microphone inputs. Connect external surround sound speakers seating to create the best video experience in your room. The Bluetooth wireless receiver feature is compatible with all today’s devices and makes it easy to set up music instantly.

Connect to your entire home theater system, including TV, DVD player, soundbar, subwoofer, and multiple speakers for professional stereo sound. The rear panel has a speaker connector, RCA audio inputs, a high-output subwoofer, digital optical audio output, component S-video connectors, and headphones for listening. MP3 digital audio support lets you play your entire digital media library while adjusting the volume in the Control Center panel. Enjoy a variety of audio entertainment with the Pyle Bluetooth Home Theater Stereo Receiver System.

Reference Link

https://www.pyleaudio.com/sku/PLMRMP1A/2-Channel-Waterproof-iPodMP3-Marine-Power-Amplifier

PLMRMP3A_compressed