Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Feature-Image

Rode Procaster Broadcast Quality Dynamic Microphone User Manual

Rode logo

Rode Procaster Broadcast Quality Dynamic Microphone User Manual

Rode-Procaster-Dynamic-Broadcast-Microphones-User-Manual-Image-1

Introduction

Thank you for investing in the RØDE Procaster broadcast quality dynamic microphone. Please take the time to visit www.rode.com an register your microphone for a full ten year warranty. While there, you can view studio tips and techniques, as well as browse a comprehensive range of accessories for the Procaster and other RØDE microphones.

Specifications

Acoustic Principle:                                       Dynamic
Polar Pattern:                                                Cardioid (See graph)
Frequency Range:                                         75Hz ~ 18,000Hz
Output Impedence:                                      320Ω
Sensitivity:                                                     -56dB ± 2 dB re 1V/Pa (1.6mV @ 94 dB SPL) @ 1 kHz
Output Connection:                                       3-pin XLR balanced output between pin 2(+), pin 3(-) and pin 1 (ground)
Net weight:                                                      695g (1.53lbs)
Dimensions:                                                    Length: 214mm (8.425”)
Width:                                                               Ø53mm (2.086”)

Frequency Response

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-1

Polar Response

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-2

Features

  • Broadcast sound quality
  •  High output dynamic capsule
  •  Balanced, low impedance output
  •  Internal shock mounting of capsule for low handling noise
  •  Internal pop filter to reduce plosives
  •  Robust, all metal construction
  • Designed & manufactured in Australia
  • Full 10 year warranty*

Accessories

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-3Stand mount (RM2 – included)

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-4

Zip pouch (ZP1 – included)

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-5Shock mount (PSM1 – optional)

Rode-Procaster-Broadcast-Quality-Dynamic-Microphone-User-Manual-Image-6

Studio arm (PSA1 – optional)

Using the Procaster

  • The Procaster is a broadcast-grade end-address microphone, and for optimum results you should address the microphone at a distance of no more than 5cm (2”).
  • The stand mount includes a thread adaptor allowing connection to either 3/8” or 5/8” stand threads.
    Alternatively the PSM1 shock mount and PSA1 studio boom arm is optionally available to isolate the microphone from external vibrations.
  •  An absorbent crystal pack is supplied with the Procaster. This should stay in the zip pouch at the head of the
    microphone when not in use to prevent any build up of moisture. When the crystals turn pink, they can be
    dried out in an oven at 100 – 150 degrees celsius for approximately ten minutes. Once they turn blue they can be reused.

Warranty Information

All RØDE microphones are warranted for one year from date of purchase. A free ten year extended warranty is available for the Procaster if you register it online at www.rode.com/warranty.  The warranty excludes defects
caused by normal wear and tear, modification,shipping damage, or failure to use the microphone as per the instruction manual. If you experience any problem, or have any questions regarding your RØDE microphone, first contact the dealer who sold it to you. We have an extensive distributor/dealer network, but if you have difficulty getting the advice or assistance you require, do not hesitate to contact us directly.

DOWNLOAD PDF

Rode Procaster Broadcast Quality Dynamic Microphone User Manual

REFERENCE LINK

https://rode.com/

Leave a Reply