Philips SCF65X Avent Natural Baby Bottle With Natural Response Nipple User Guide
Child’s Safety and Health
Warning!
- Always use this product with adult supervision.
- Never use feeding teats as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Heating in a microwave oven may produce localised high temperatures.
- Keep all components not in use out of the reach of children.
- Do not use abrasive cleaning agents or anti-bacterial cleaners.
- Never refreeze breast milk or add fresh breast milk to already frozen milk.
- Do not use handles with glass bottles.
- Throw away any part at the first signs of damage or weakness.
Teat
- Throw away at the first signs of damage or weakness.
- For hygiene reasons, we recommend replacing teats after 3 months.
- Keep teats in a dry, covered container.
- Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant
Before first use
- Clean to ensure hygiene by washing and rinsing all parts thoroughly.
- Sterilise by using a Philips Avent sterilizer or boil all parts for 5 minutes.This is to ensure hygiene.
- During sterilising with boiling water, prevent the bottle or other parts from touching the side of the pan. This can cause irreversible product deformation or damage that Philips cannot be held liable for. pull the feeding teat in all directions.
Cleaning
- After every use, take all items apart, wash in warm soapy water and rinse thoroughly. Make sure that you wash your hands thoroughly and that the surfaces are clean
- Excessive concentration of detergents to crack. Should this occur, replace immediately.
- Dishwasher safe – food colorings may discolor components.
- Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant recommended, as this may weaken the teat. each use and pull the feeding teat in all directions. Throw away at the first signs of damage or weakness of any part.
Assembly
When you assemble the bottle, make sure you place the cap vertically onto the bottle so that the teat sits upright . To remove the cap, place your hand over the cap and your thumb in the dimple of the cap. The teat is easier to assemble if you wriggle it upwards instead of pulling it up in a straight line. Make sure you pull the teat through until its lower part is even with the screw ring.
Maintenance
- Pull the feeding teat in all directions.
- Throw away any part at the first signs of damage or weakness.
- For hygiene reasons, we recommend replacing teats after 3 months.
- Keep teats in a dry, covered container.
Glass natural bottle
Glass bottles may break. Do not use metal inside the bottle to stir contents or for cleaning. This can damage the glass on the inside of the bottle. Do not use bottles if there are any cracks on or glass fragments in the bottle. Do not let babies drink unsupervised with this
bottle. Do not use handles with glass bottles.
Choosing the right teat for your baby
The Philips Avent teats are available with different flow rates to help your baby with drinking. Over time you can change the teat accommodating the individual needs of your baby. Philips Avent teats are clearly numbered on the side to indicate flow rate (see image). Make sure you use a teat with the correct flow rate when you feed your baby. Use a lower flow rate if your baby chokes, is leaking milk or has trouble adjusting to the drinking speed.
Compatibility
- Spare teats are available separately.
- The high quality plastic Natural bottle is compatible with most Philips Avent breast pumps, spouts, sealing discs and cup tops.
- The glass Natural bottle is compatible with Philips Avent breast pumps and sealing discs. For safety reasons, it is not recommended to use glass Natural bottles with handles, spouts and cup tops and spouts. If the bottle falls, it may break.
DOWNLOAD PDF
Philips SCF65X Avent Natural Baby Bottle With Natural Response Nipple User Guide
