Snailax SL-126B Heat Massage Cushion Manual
Safety Instructions
Please read the following instructions carefully before putting your massage device into use to ensure trouble-free operation and optimum efficiency. Please retain these operation instructions for further use!
- The massage device conforms to recognized technical principles and the latest safety regulations.
- Do not wet,do not use pins, never remove cover.
- This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on, or near children or disabled persons.
- This appliance should never be left unattended when plugged in.
- Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
- Never touch the power plug with wet hands.
- Please avoid contact of the device with water, high temperatures and direct sunlight.
- Do not use any damaged cables, plugs or loose sockets.
- Never operate under blankets where the air opening may be blocked.
- In case of malfunction, disconnect immediately from the mains.
- Do not use if you have skin disorders, open wounds, or swollen or inflamed areas.
- Misuse or incorrect use excludes any liability for damage.
- Do not use this device while driving.
- Do not use while you sleep.
- The packaging material supplied should not be used as a toy.
- Do not use this product for medical treatment.
Failure to observe the above instructions may constitute misuse of the product and can cause serious injury or burns.
Thank you for purchasing Cordless shiatsu back massager by Snailax Corporation. With normal care and proper treatment, it will provide years of reliable service. Please read all instructions carefully before using this product. Please retain this manual for future
reference.
FEATURES
- Genuine shiatsu back massage
- 4 rotating flexible massage nodes
- Customizable SPOT massage
- Soothing heat function
- Rechargeable battery
- Carry handle design
CONTENTS
- SL-166 Cordless shiatsu back massager
- 13V Charging adapter
Setup and Operation
- Place the massager on a chair, sofa or on other support.
- Connect the adapter cable to the corresponding cable on the cushion.
- Plug the home adapter into an outlet between 100-240V.
- Turn on the device using the control panel ( instructions as below).
- The detachable intensity control flap lets you choose a sotler or more intense massage.
- You also may soften the massage pressure by placing a blanket or towel between you
and the device.
Care and Cleaning Instructions
- Do not wash in washing machine or immerse the product or the adapter in water.
- Always switch off before cleaning and remove the adapter from the socket with clean, dry hands.
- The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe the product with alcohol or harsh chemicals such as thinner or bleach.
- Keep away from heat, fire or exposure to direct sunlight.
- Do not apply excessive pressure or impact onto massager/massage heads. Application of a direct force in excess of 110 lbs. may damage your massager and invalidate your warranty. Refrain from over usage of the device.
- Store the massager in a cool, dry place out of reach of children.
- Avoid contact with sharp edges or pointed objects which might cut or puncture the cover of massager.
Controller Instruction
TROUBLESHOOTING GUIDE
| Fault | Solutions |
| Massage heads rotating at reduced speed. | The load on the massage heads is excessive. Reduce load and try again. |
|
Device switches off suddenly | Device may have been in use for 15mins. Auto-shut- off function activated. Continue using by pressing the ‘power’ button after resting the unit for 15mins. |
| Over-heat protection function activated. Device is switched off for your safety. Please rest device for 15- 30mins before restarting. | |
|
Device fail to start | Check if device has been used for more than 15mins. If so, let device rest for 15mins before continuing. Device may require longer time to cool in warmer environments. |
| The battery is low,please charge in time. | |
| Check if adapter is plugged into socket and adapter output is connected to device power inlet wire . | |
| Jerky motion of massage heads /Vibrations from device | Excessive pressure may have been applied onto the device. Reduce the load and try again. |
| Infra-red lights are on but no motion from massage heads | Device may be jammed. Remove pressure / load from the device and press the ‘Power’ button to try again. |
Warranty
If you have any issue about the product, please feel free to contact us by sending email to support@snailax.com We will strive to provide the best service possible within 24 hours.
30 days unconditionally Return
Snailax product can be returned to receive a full refund for any reason within 30 days. Please contact our customers service (support@snailax.com), our staff will contact you within 24 hours.
90 days refund/replace
Snailax product can be returned / replaced within 90 days if the product break down in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use, customers can enjoy the relevant warranty to get them replaced.
Attention!
No warranty will be given to any force majeure and man-made causes to a defective product, such as improper care, personal tear down and willful damage,etc.
Extend Warranty for Free
1) Enter the following URL or scan the QR code below to find Snailax facebook page and like it,enter“Warranty” to messenger to extend your warranty from 1 year to 3 years.
https://www.facebook.com/snailax
Send message “Warranty” and email us support@snailax.com to extend your warranty from 1 year to 3 years.
REFERENCE
https://cdn.shopify.com/s/files/1/2502/3672/files/SL-591_user_manual_2022.07.07.pdf?v=1664349068
