SNAILAX SL-488 Hand Massager featured

SNAILAX SL-488 Hand Massager user manual

Snailax logo

SNAILAX SL-488 Hand Massager user manual

SNAILAX SL-488 Hand Massager

Safety Instructions


  • ALWAYS unplug the appliance from the electrical outlet immediately after using and before cleaning.
  • Do not wet, do not use pins, never remove cover.
  • This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on,or near children or disabled persons.
  • This appliance should never be let unattended when plugged in.
  • Any possible repairs may only be carried out by authorized expert staff. Improper use and unauthorized repairs are not permitted for safety reasons and lead to loss of warranty.
  • Never touch the power plug with wet hands.
  • Please avoid contact of the device with water, high temperatures and direct sunlight.
  • Do not use any damaged cables, plugs or loose sockets.
  • In case of malunion, disconnect immediately from the mains.
  • Do not use if you have skin disorders, open wounds, or swollen or inflamed areas.
  • Misuse or incorrect use excludes any liability for damage.
  • Do not use this device while driving.
  • Do not use while you sleep.
  • Do not use this product for medical treatment.
  • In order to avoid excessively simulating the muscles and nerves, the recommended massage time should not be exceeded 15 minutes at a time.


Thank you for purchasing SNAILAX Hand Massager With normal care and proper treatment, it will provide years of reliable service

  1. Compression Massage with soothing heat function.
  2. Six massage modes to choose
  3. Each massage mode with 6 intensity levels for options
  4. Build-in rechargeable Lithium battery
  5. Optional vibration function


  • Hand Massager
  • USB Charging cableSNAILAX SL-488 Hand Massager fig 1


  • Model: SL-488
  • Weight: 2.13 Lbs
  • Adapter Input: 100-240V~ 50/60 Hz
  • Rated Voltage: DC5V 1A
  • Rated Power: 5W
  • Default Automatic Runtime: 15 minutes
  • Battery Spec: 3.7V Lithium battery, 2500mAH

Instructions for use

SNAILAX SL-488 Hand Massager fig 2

This device will switch off automatically after the 15-minute timer runs out. You should allow your body some rest periods. To avoid straining your muscles too much, we recommend not exceeding a continuous massage of 15 Minutes per time and not exceeding 3 times use one day

Battery Charging

  1. When the battery is low, all indicators will start flashing.
  2. Connect the USB cable to any USB charger, it can be plugged into a portable power bank, mobile phone battery chargers, laptop, and any USB port.SNAILAX SL-488 Hand Massager fig 3
  3. When charging, the power indicator light will start flashing.
  4. When full charge, the power indicator turn off.
  5. Normally it takes about 5 hours to fully charge.
  6. The machine will be turned off automatically when charging.
  7. After fully charged, the device can work continuously for around 1.5 hours (heating function is on). or around 4.5hours(heating function is off)

Note: begoring using this product for the first time, please fully charge it. If the device is not in use for a long time, the product should be charged once a month to protect the battery life from shortening.

Battery Disposal Warning:
The unit contains a Lithium Ion battery.
Please contact your local recycling center to find out how to properly dispose of the product.


Can not start the massager 

Ba�ery Low, Please charge it before using


The massager stoped abnormally

Ba�ery runs out of power, charge the ba�ery; Self-med 15 mins is out, restart the product
Massager slight noise 

It is normal working noise of the internal mechanism

Care and Maintenance

Care and cleaning instructions

  1. Always unplug the unit before cleaning it.
  2. Before cleaning, allow the unit to cool.
  3. Dampen a cloth in water or a 3%–5% mild detergent solution.
  4. Wipe the dirty areas with a wet cloth.
  5. Do not use a sharp brush, sharp tool, gasoline, and diesel to clean it.
  6. Do not use a wet cloth to clean the control panel, lest cause failure, only use a dry cloth to wipe the control panel.
  7. Never submerge any part of the unit in liquid.
  8. Wait for the unit to become fully dry before use.


  1. Please keep it in a box and keep it in a safe, dry, and cool place.
  2. Do not keep it in any place with high temperature, near fire or direct sunlight, or it may fade or damage
  3. Do not contact benzene, diligent, or any other corrosive liquid.


If you have any issues with the product, please feel free to contact us by sending an email to We will strive to provide the best service possible within 24 hours.

30 days unconditionally Return
Snailax products can be returned to receive a full refund for any reason within 30 days. Please contact our customer service (, our staff will contact you within 24 hours.

90 days refund/replace
Snailax products can be returned/replaced within 90 days if the product breaks down in the period of proper use.
12 months Warranty
If the product breaks down within 12 month period of proper use, customers can enjoy the relevant warranty to get them replaced.

No warranty will be given to any force majeure and man-made causes of a defective product, such as improper care, personal tear down and willful damage, etc.

Extend Warranty for Free

  1. Enter the following URL or scan the QR code below to find the Snailax Facebook page and like it, enter “Warranty” to messenger to extend your warranty from 1 year to 3 years.SNAILAX SL-488 Hand Massager fig 4
  2. OR 2) Send the message “Warranty” and email us at to extend your warranty from 1 year to 3 years.

Have question?

Tel: 734-709-6982
Monday-Friday 9:00 AM-4:30 PM


NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit are not expressly approved by the party responsible for compliance and could void the user’s authority to operate the equipment.

2750 Carpenter Road, Suite 1 B, Ann Arbor, 48108 Tel:734-709-6982


Download pdf


Leave a Reply