Table of contents
show
Soundcore Life U2 Bluetooth Neckband User Manual
Charging
- Fully dry off the USB port before charging.
- To prevent damage, use the provided USB-C cable.
LED indicator
 | Steady red | Being charged |
| | Steady blue | Fully charged |
|
| Flashing red | Low battery |
Powering On/Off
- Press and hold the multi-function button for 1 second to power on.
- Press and hold the multi-function button for 3 seconds to power off
| Steady white for 1 second | Powered on |
| | Steady red for 1 second | Powered off |
Bluetooth Pairing
When powered on, find “Soundcore Life U2” in the Bluetooth list on your device and connect.When powered off, press and hold the multi-function button for 3 seconds until the LED flashes blue to enter the Bluetooth pairing mode.
Multi-point Pairing Mode
When successfully connected with the first device, press and hold the volume up button and volume down button simultaneously for 3 seconds to pair with another device
- Soundcore Life U2 can only play music on one mobile device at a time.
- Each time you power your Soundcore Life U2, it will automatically connect to your last successfully connected device if available.
Button Controls
| Answer / End a call |
| Press |
| Put the current call on hold and answer a new incoming call | ||
| Reject a call |
| Press and hold for 1 second |
| Switch between held call and active call | ||
Wearing
Choose the EarTips and Ear Wings that fit your ears best.
Reset
- Make sure the headphone is powered off and being charged.
- Press and hold the multi-function button and volume up button simultaneously for 5 seconds until the LED indicator flashes red twice. All the memory data will be cleared.
Specifications
Specifications are subject to change without notice.
- Input 5 V 0.5 A
- Charging time 2 hours
- Playtime (varies by volume level and content) 24 hours
- Driver size 10 mm × 2
- Frequency response 20 Hz – 20 kHz
- Impedance 16 Ω
- Waterproof level IPX7
- Bluetooth version V5.0
- Bluetooth range 10 m / 33 ft
