Srhythm NC85 Dynamic Hybrid Noise Canceling Headphones User Guide

Srhythm NC85 Dynamic Hybrid Noise Canceling Headphones User Guide

Safety 
Instructions

What’s 
in
the
Box

At 
a
 Glance

How 
to
 Use

Use
 ANC 
Function
To 
turn
 on 
ANC,
press 
the 
ANC 
Button
 when 
Bluetooth
 turned
 on;
Long
 press
 3
 seconds
 the
 ANC
Button
 when
Bluetooth
 turned 
off;
(the 
LED
 indicator 
light 
will 
be
 green 
when 
ANC
 ON) To 
turn
 off
 ANC,
 press 
the
 ANC
 Button;
(the
 LED 
indicator 
light 
green
 color
 will 
be
 off
 when
 ANC 
OFF)

Use
 Transparency
 Function
Press
 the 
ANC
 button
 to
 switch 
between 
ANC 
mode,
 Normal 
mode 
and
 Transparency
 mode.

Use 
Bluetooth 
Function

1. Hold 
the
 Multi-function
 Button
 for 
3-5
 seconds
 to
 turn 
headphone
 Bluetooth 
on,the 
enter
 pairing
 mode.(the 
LED 
indicator 
light 
will 
be 
blue 
and
 red
 flashing 
quickly.)
2. Start
 your 
mobile 
phone 
Bluetooth
 and 
find
 headphone 
Bluetooth
 pairing
 name
”Srhythm
 NC85″ 
to
 click 
it 
to
 pair.(the
 LED 
indicator 
light 
will
 be 
blue
 flashing
 slowly
 after
 paired 
successfully.)
3. Hold
 the 
Multi-function
 Button
 for 
3-5
 seconds 
to
 turn 
headphone
 Bluetooth
 off.
   

Function Details

Easy Pairing

1. Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth on,then enter pairing mode.(the LED indicator light will be blue and red flashing quickly.)
2. Keep headphone and your mobile phone as close as possible during pairing process.
3.  Turn on your mobile phone Bluetooth. Search for headphone Bluetooth signal on mobile phone and click “NC85” to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during pairing procedure,please enter “0000” (four zeros).

Pair to the Second Bluetooth Device:

1. Please make sure that headphone is connected to the first Bluetooth device successfully and music is not playing.
2. Hold the Multi-function button until the headphone switch off and continue with the steps “Easy Pairing”(Let the headphone re-enter pairing mode,the LED indicator light will flash blue and red alternately)
3. Pair headphone with the second device according to “Easy Pairing” steps.
4. Return to the first Bluetooth device and pair it with headphone again. Now both of your devices are paired with headphone.

Active Noise Canceling(ANC) ON/OFF:
To turn on ANC, press the ANC Button; (the LED indicator light will be green when ANC ON.)To turn off ANC, press the ANC Button; (the LED indicator light green color will be off when ANC OFF.)

Wired Mode
Headphone support AUX input for wired external audio source connection. Simply turn headphone Bluetooth off and plug in the audio cable.For any ANC Bluetooth headphone,it is still need battery power support for wired mode.

Voice 
Dialing
Press 
the 
Multi-function
 Button
 3
 times
 to 
activate
 voice
 dialing function(compatible 
with
 iPhone 
Siri
 and
 selected Android
 voice
 dialing 
software)

How 
to
 Wear

• 90°
 in ward
 rotation
• 80°
in ward 
folding
• Adjustable 
Headband

If
 your 
headphone 
has 
no
 sound
 or 
the
 microphone
 is
 not 
working:

Please 
make
 sure 
that
 the 
headphone
 is
 connected
 before 
starting
 software.

Airplane
 Adaptor
 Connection

Connect the Airplane Adaptor to audio socket(double holes) of aircraft seat,use 3.5mm audio cable to connect with your headphone and Airplane Adaptor.

Headphone Specification

LED Indicator Light

• Pairing: Blue and red lights flash alternately
• Paired: Blue light flashes
• Playing:Blue light slowly flashes
• Charging: Red light turns on
• Full Charge: Red light turns off or Blue light turns on
• Battery Low: Red light turns on with voice prompt
• ANC ON: Green light turns on
• ANC OFF: Green light turns off
• Bluetooth OFF: Blue and red lights turn off

Technical Specification

• Bluetooth range: 10m/33ft
• Frequency response: 20–20KHz
• Driver diameter: Φ40mm
• Use time: 12-16 hours
• Bluetooth version: V5.0
• Waterproof rating: IPX4
• Net weight: 230 g
• Impedance: 32 Ω
• Battery capacity: 400mAh
• Input: 5V-12V
• Chip: ATS
• Charging time: 1-2 hours
• Bluetooth profile: A2DP, AVRCP, HSP, HFP
• Product name: Srhythm NC15

Charging

Use the included micro USB charging cable to connect to headphone Charging Port. Connect the other end of charging cable to a computer USB port or USB wall charger under 6.3V voltage.Turn off headphone Bluetooth and ANC function before charging.Please don’t use headphone while charging.The LED indicator light will be off or blue color when full of charge basing on headphone turn off status.Start your mobile phone Bluetooth and find headphone Bluetooth pairing name NC15 to click it to pair.(the LED indicator light will be blue flashing slowly after pairing successfully.)Hold the Multi-function Button for 3-5 seconds to turn headphone Bluetooth off.

If any issues, here tips for you:

1. Full charge your headphone(don’t use fast charger)
2. Reset headphone by inserting audio cable into headphone audio socket then removing it. Or the upgraded NC15 headphones would be reset automatically when charging.

Q&A

1. Why can’t headphone turn on?
   Please double check the battery status of your headphone.
2. Can I replace battery in the headphone?
   No,you can not.Headphone uses a built-in non-detachable Li-Polymer battery that can’t be replaced.
3.  Can I use headphone while driving?
   For your safety,we strongly recommend that you do not use headphone while driving to avoid distraction.
4. Why can’t I hear any sound from my computer or mobile phone?
   Please check if output channel of your computer supports A2DP profile.Also check the volume settings on your headphone and computer/mobile phone.
5. Why am I unable to use headphone to control the volume of a track playing on an APP on my mobile phone?
   Due to configurations of different application software,headphone may not be completely compatible with some APPs.

REFERENCE LINK

https://www.srhythm.com/