Tribit BTH96 C2 Wireless Ear Buds Owner Manual
Package Contents
2021 Wireless Earbuds, Tribit Qualcomm QCC3040 Bluetooth 5.2, 4 Mics CVC 8.0 Noise Reduction 32H Playtime Clear Calls Volume Control True Wireless Bluetooth Earbuds Earphones, Flybuds C2
Comfortable Half in-ear Desig
FlyBuds C2 features a classic half in-ear design with large 13mm drivers that were designed to sit comfortably in the ears without causing pain or discomfort after long periods of wear.
- Earbuds(L/R)
- Charging Case
- USB-C Charging Cable
- User Manual
Powerful Stereo Sound
FlyBuds C2 wireless Bluetooth earbuds feature the latest Qualcomm QCC3040 chip, aptX high-quality audio decoding, and up to 48KHz frequency to provide listeners with detailed audio, punchy bass and a stunning stereo sound.
Crystal Clear, High Quality Calls
4 Qualcomm Microphones easily pick up your voice while CVC 8.0 technology reduces 90% of background noises for crystal clear, high-quality calls whether you are having phone calls at home, on the go, or in a noisy environment.
Product Parts
How to Wear the Earbuds
To Wear
Place the earbud in your ear canal and rotate it until comfortable.
To Call
Aim the microphone at the mouth for a better call effect.
To Pick & Place
Power ON / Power OFF
Bluetooth Connection Instructions
Connect the earbuds to a Bluetooth device:
Op the charging case and the earbuds will automatically enter theN bluetooth pairing mode then the earbuds indicator lights will flash alternately red and white. Turn on the Bluetooth function in the Bluetooth device, refresh the Bluetooth device listing, then select the paired audio device named “Tribit FlyBuds C2” to connect. The indicator lights of the earbuds will go off after it connects successfully.
Connect the earbuds with other devices:
Method l : Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
Method 2: Tap either earbud for 4 times. When the white indicator light goes on, touch and hold the earbud for 3 seconds. When the indicator lights of both earbuds flash in red at the same time, the earbuds will automatically enter Bluetooth pairing mode.
Charging Instructions
When the earbuds’ indicator lights flashes in red slowly, please charge the earbuds in time.
To charge the earbuds: Put the earbuds into the charging case and close the case to start charging. The indicator lights on the far left and right of the charging box show the charging status of the each earbud. During charging, the indicator lights will be always on and will go off after the earbuds are fully.
How to Reset the Earbuds
Please ensure the 2 earbuds are powered on and disconnected from other Bluetooth enabled devices before resetting.
Step I: Tap both earbuds for 6 times simultaneously and quickly, and the LED indicator on both will glow white sturdily. (If you do this with earbuds being worn, you will hear a prompt sound after completing the step)
Step 2: Double tap both earbuds again within lOs and the LED indicator on both will glow red and white alternately for several times and then will turn off. (If you do this with earbuds being worn, you will hear a prompt sound after completing this step.)
Step 3: After that, the LED indicator of both earbuds will flash white quickly to indicate they are being reset. Please move them closer to each other. After the LED indicators stop flashing, the earbuds have been reset successfully.
Frequency band & Maximum transmission power
Frequency band: 2402-2480 MHz Maximum transmission power: -6 -+4dBm
Warning
- Do not dismantle or modify the earbuds for any reason, otherwise any malfunction of the earbuds is not covered by the warranty.
- Do not deliberately contact the earbuds to liquids, which may damage the earbuds may be damaged and the warranty turns
- Do not place the earbuds in the environment where the temperature is too high or too low (above 45 C or below-20 C ).
- This product includes a built-in lithium battery.
- Please keep the earbuds away from children to avoid accidental swallowing and other injuries
FCC Statement
Changes or modifications not expressly approved by the party responsi ble for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules.These limits are designed to provide reasonable protection against. Generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.
