Tribit BTS52 StormBox Blast Speaker Manual
Packing List
Product Introduction
How to Charge
- How to charge the speaker: Connect the speaker with one end of the provided power cord, and plug the other end into a power outlet.
- How to charge other devices through the speaker: Connect the speaker and other devices with the USB-C charging cable.
Button Control
Power ON/OFF
When the StormBox Blast cannot work normally due to unknown reasons, long press the power button for 8S to achieve forced shutdown and then restart the StormBox Blast.
Bluetooth Connection
StormBox Blast：
- Automatically connects back to 1 paired device;
- Connects 2 devices at the same time;
- Memorizes 8 Bluetooth devices;
- When two devices are simultaneously connected to the StormBox Blast, device A needs to pause the playback and then device B can play.
Stereo Mode
- Please make sure that the two speakers are turned on.
- Long press the Bluetooth button of speaker A for 5s to enter the Stereo Mode pairing ( Note: this speaker will be regarded as the main speaker );
- Short press the Bluetooth button of the speaker B to enter the pairing mode ( Note: this speaker will be regarded as a secondary speaker );
- When you hear the prompt sound “stereo mode”, the pairing is successful and speaker A & speaker B enter the Stereo Mode. At this time, the main speaker will broadcast the “left channel” and the secondary speaker will broadcast the “right channel”.
Reset
If the speaker has abnormal conditions, you can try to reset the Blast ( Note: long press the ”volume +”and ”volume -” buttons at the same time for 5 seconds ). After resetting, the historical pairing information will be cleared, and you need to re-pair the Blast with the device before use.
- Product Specifications
- Bluetooth Version V5.3
- Bluetooth Protocol A2DP，AVRCP，
- Output Power 90W
- Frequency Response
- Range 50~20KHz
- Frequency Band Range 2402-2480MHz
- Maximum Transmission
- Power ≤6dBm
- Battery (3.6v 2200mAh*9) / 71.28Wh
- Play Time 20 hours (different according to different music and volume)
- Charging Time 3.5 hours @100V-240V~, 50/60Hz
- Waterproofing Grade IPX7
- Size 405mm x 162.9mm x 226mm
- Weight 5450g
Customer Service
- 18-month warranty
- For more services, please visit: Email: support@tribit.com
Safety Precautions
- Do not place the speaker in a place where it is easy to fall.
- Do not disassemble, repair, or modify this product by yourself.
- Keep the speaker away from extreme temperatures.
- Do not use the speaker in an outdoor thunderstorm environment.
- Do not use any corrosive cleaners or other chemical solutions to clean the speaker.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including
