TRIBIT X-Free Go Wireless Headphones featured

TRIBIT X-Free Go Wireless Headphones Manual


TRIBIT X-Free Go Wireless Headphones Manual

TRIBIT X-Free Go Wireless Headphones

Package Contents

TRIBIT X-Free Go Wireless Headphones fig 1

Product Diagram

TRIBIT X-Free Go Wireless Headphones fig 2

Turn on/ off

TRIBIT X-Free Go Wireless Headphones fig 3

  1. To power on the headphones, press and hold the MFB button for 2 seconds. The LED Indicator will flash blue for 1 second.
  2. To power off the headphones, press and hold the MFB button for 4 seconds. The LED indicator will flash red for 1 second and then will turn off.

Bluetooth Connection

TRIBIT X-Free Go Wireless Headphones fig 4

  1. Press and hold the MFB button for 5 seconds until the LED indicator flashes blue. A moment later, the indicator will flash red and blue alternately to indicate that the headphones automatically enter pairing mode.
  2. Activate the Bluetooth function of your phone to search for Bluetooth devices, then click the Tribit X-Free Go in the pairing list for connection.

Connect with Two Devices Simultaneously

  1. Follow the instructions in the above Bluetooth Connection section to pair the headphones with Device A.
  2. Once paired, disable the Bluetooth function on Device A.
  3. Pair the headphones with Device Bin the same way with Device A.
  4. Once paired with Device B, reactivate Bluetooth function on Device A and select “Tribit XFree Go” in the pairing list.
  5. Now you can make and receive calls from either of the two paired devices.

Operation of Buttons

Volume upShort press the”+” button
Volume downShort press the”-” button
Next trackPress and hold the”+” button for 2 seconds
Previous trackPress and hold the”-” button for 2 seconds
Play/ PausePress the MFB button once

End the call


Press the MFB button once

Reject the callKeep the MFB button pressed for seconds
Redial the last

called number

Press the”+” and”-” buttons simultaneously for 1 second
Activate SiriPress the MFB button twice


Clear the

pairing list

Press the MFB button and”+” button simultaneously for 4 seconds in the pow­ er-on state to clear the pairing list, then the headphones will enter pairing state automatically.

Voice Prompt

Successful pairingConnected

Charge the Headphones

Connect the USB end of the provided charging cable to a SV power outlet ( power adapter is not included}, and connect the Micro USB end into the headphones. The LED indicator will glow red during the charging process, then change into green after being fully charged ( within 3 hours).

Customer Service

The headphones have a full 18-month warranty against manufacturing defects starting from the purchase date. For FAQs and more information, please email to

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment hos been tested and found to comply with the limits for a Closes B digital device, pursuant to Port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into on outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.



TRIBIT X-Free Go Wireless Headphones Manual

Leave a Reply