Turtle Beach Ear Force PLa Amplified Stereo Gaming Headset Quick Start Guide
About the PLa Headset
The Ear Force® PLa is the ideal headset for Playstation® 3 gamers seeking a more immersive experience compared to standard PS3™ communicators. Unlike basic communicator headsets that only let you hear chat in one ear, the PLa combines high-fidelity, amplified game sound with crystal-clear PSN chat in a sleek, compact design with independent game and chat volume controls.
Noise-isolating ear cushions help to block out distractions so you can concentrate on the game. If you’re serious about gaming, then get serious about the sound. Step up to the PLa and experience game audio like never before.
Features
Amplified Audio
Enhances game sounds for a more immersive experience.
Bass Boost
Built-in bass boost adds depth and realism to the game audio.
Independent Volume Controls
Allows for personalized balancing of game and chat audio.
Microphone Monitor
Let’s you hear what you’re saying while gaming.
USB Powered
No batteries required.
PC/Mac Compatible
Integrated USB stereo audio for PC and Mac gaming.
product support and warranty information: TurtleBeach.com/support
What’s in the Box
PLA Headset
- Chat Volume Control: Adjusts the chat level.
- Game Volume: Adjusts the game level.
- Mic Mute Switch: Turns the mic on or off.
PS3™ Setup (HDMI)
Note: The HDMI cable does not affect the setup or audio of the PLa headset. The HDMI cable should still be connected from the PS3 to to
your TV HDMI input.
PS3 Setup (RCA)
Note: The yellow RCA (composite) video cable does not affect the setup or audio of the PLa headset. This cable should still be connected to the yellow RCA (composite) video input jack on your TV.
PS3 Audio Setup
Analog
Step 1
After powering on the PS3, go to “Settings” > “Sound Settings” > “Audio Output Settings”.
Step 2
Select ” Audio Input Connector / SCART / AV Multi” to send the audio output to the PLa.
Step 3
Press “X” to save this setting.
HDMI or Digital (optical)
Step 1
After powering on the PS3, go to “Settings” > “Sound Settings” > “Audio Multi-Output”. This will allow you to use the standard PS3 AV cable simultaneously with an HDMI or digital (optical) audio output.
PS3 Chat Settings
Step 1:
After powering on the PS3, go to “Settings” > “Accessory Settings” > “Audio Device Settings”.
Step 2:
Click on “Input Device” and select “Turtle Beach PLa Headset” from the options.
Step 3:
Click on “Output Device” and select “Turtle Beach PLa Headset” from the options.
Step 4: Click on “Microphone Level” and adjust the level of your chat output so that the bar graph barely reaches the red area when you speak loudly. Click “OK” to save.
Connecting to a PC or Mac®
Insert the PLa’s USB/Power connector to an open USB port on your PC/Mac to power the headset/amplifier.
USB Stereo Headset:
The USB connection is used for mic and audio signals and appears as “Turtle Beach PLa Headset” in Windows® and Mac operating systems. *Please note that the chat volume wheel controls all audio when connected to a PC/Mac. AIso make sure that the game volume is at the lowest setting to avoid any possible noise.
Connecting to a PC or Mac® (OPTIONAL)
An optional RCA to 3.5mm adapter cable* can be used to connect the game sound to the PC sound card output. This lets you use the game volume to control the game level and the chat volume to control Skype, Ventrillo or other chat program routed to the USB channel. *Click on the “Parts & Accessories” tab on the PLa product page via Turtlebeach.com/PLa
Technical Specifications / Maintaining Your Headset
Headset
- Speakers: 40mm with neodymium magnets
- Speaker Frequency Response: 20Hz – 20kHz, 120dB SPL @ 1kHz
- PS3 connection: RCA
- Cable length: 4.5m (15ft)
- PS3 chat output: USB
- Power: USB
- Chat connection: USB
Avoid Heat: Avoid resting or storing the headset or cables in or on top of units that generate heat. Gaming consoles are known to generate and dissipate unusually high levels of heat, and the heat can degrade the plastic resulting in twisting and eventual exposure of the internal wiring.
Storage: To help prevent damage to your Turtle Beach Headset, store it in a dry location where there is no risk of heavy items falling on your headset. Do not leave your headset or any accessories in a location where people or pets might accidentally trip over it.
Cleaning: Only use a dry cloth or slightly damp cloth. Cleaning solutions may damage your headset.
Transporting: Always disconnect all cables when transporting your headset.
Wire Management: Use the Velcro attached to your headset cable to avoid tangles when not in use.
Pets: Pets love to chew cords. To prevent this, keep your headset out of the reach of your pets.
Safety Notice
To avoid potential damage to the device, always disconnect all cables before transporting it.
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time, so it is important to keep the volume at a safe level. Over time, your ears adapt to loud volume levels, so a level that may not cause initial discomfort can still damage your hearing. If you experience ringing in your ears after listening with the headset, it means the volume is set too loud. The louder the volume is set, the less time it takes to affect your hearing. So, please take care to listen at moderate levels.
- Before placing a headset on your ears, turn the volume down completely, then slowly increase it to a comfortable level.
- Turn down the volume if you can’t hear people speaking near you.
- Avoid turning up the volume to block out noisy surroundings.
FCC Declaration of Conformity
Product Name Ear Force PLa
Model Number TBS-3006-01
FCC Rules FCC Part 15, Class B
Operating Environment: GENERAL OFFICE AND HOME USE
FCC COMPLIANT STATEMENT
This device complies with part 15 of the FCC rules. Operation is subjected to the following conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation.
INFORMATION TO USER
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The user’s manual or instruction manual for an intention or unintentional radiator shall caution the user that the changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARNING: Changes or modifications made to this equipment not expressly approved by VOYETRA TURTLE BEACH, INC. may void user’s authority to operate this equipment.
Limited Warranty for Turtle Beach Products
Voyetra Turtle Beach, Inc. (“VTB”) warrants to the original end-user purchaser (“Purchaser”) that the retail Turtle Beach hardware product herein (“Product”) will be free of defects in materials and workmanship for a period of one year from the date of purchase by the Purchaser (“Warranty Period”). Any Extended Warranty or Service Plans purchased through a Retail store are not honored by VTB. The Warranty refers to the repair/replacement of a defective product during this period and not a refund.
DOWNLOAD PDF LINK
https://support.turtlebeach.com/s/article/219023808-PLa-User-Guide?language=en_US
