Vaddio-535-2020-230W-Thin-Profile-Wall-Mount-Brcacket-Guide-featured-img

Vaddio 535-2020-230W Thin Profile Wall Mount Bracket Guide

Vaddio logo

Vaddio 535-2020-230W Thin Profile Wall Mount Bracket Guide

Vaddio-535-2020-230W-Thin-Profile-Wall-Mount-Brcacket-Guide-prduct-img

Part Numbers:

  • 535-2000-230 for HD-18 and HD-19
  • 535-2020-230 for HD-20, HD-USB, HD-22 and HD-30

Vaddio-535-2020-230W-Thin-Profile-Wall-Mount-Brcacket-Guide-fig-1

UNPACKING:
Carefully remove the product and all of the parts from the packaging. Unpack and identify the following parts:

  • One (1) Thin Profile Mount (camera not included)
  • Two (2) ¼”-20 x ½” Mounting Screws for 535-2000-230 – or – Two (2) ¼”-20x 3/8” Mounting Screws for 535-2020-230
  • Four (4) #8 x 1.25” Sheet Metal Screws
  • Four (4) Wall Anchors, Self Drilling

MOUNTING THE CAMERA:

The Thin Profile Wall Mount for the Vaddio HD-18 Camera can be mounted to a 2-gang wall electrical wall box or be mounted directly to a drywall surface with the supplied wall anchors or other spiral-type wall anchors of the Integrator’s choice. The slotted mounting holes are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level.

Note:
When locating the camera, consider viewing angles, lighting conditions, and possible line of site obstructions and check for in-wall obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.

INTENDED USE:
This Thin Profile Wall Mount was designed, built, and tested for use indoors and to support the weight, size, and shape of the Vaddio HD-18 Camera only. Using this mount for any other device could damage that device and/or create a potentially unsafe operating condition.

HARDWARE WARRANTY:

Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material Authorizations (RMA), Voided Warranty,

Shipping and Handling, and Products Not Under Warranty. The Vaddio Warranty Statement supersedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the Vaddio website or e-mail support at mailto:support@vaddio.com.

©2016 Vaddio – All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll-Free: 800-572-2011, Main: 763- 971-4400, FAX: 763-971-4464. Document Number 341-884 Rev B, SD: 70225.1

REFERENCE LINK

https://www.touchboards.com/vaddio-535-2020-230w/

Leave a Reply