Veho VEP-465-NEB-A Wireless Headphones with Mic User Manual
This symbol affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery-operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling center.
Guide to the headphones
- Mode
- Volume – / Previous track
- Volume + / Next track
- Power button
- 3.5mm audio port
- Pairing status LED
- Charging status LED
- USB-C charging port
- MicroSD card slot
Charging
Charging the headphones We recommend fully charging the headphones before using them for the first time. Connect the supplied USB-C cable to the headphones and then into a compatible 5V⎓1A power source. Whilst charging the status LED will show red, turning blue once fully charged.
Pairing
Pairing with a device Press and hold the power button for 3 seconds to switch the headphones on, the headphones will automatically enter pairing mode, and the status LED will flash red/blue. Select ‘Veho ZB-4’ from the Bluetooth® menu on your device, once connected, the status LED will remain blue.
Line-in cable
MicroSD card
Using a MicroSD card Insert a compatible MicroSD card, power on the headphones by pressing and holding the power button for 3 seconds, and press the mode button to detect the card.
Using the headphones
Power on/off Press and hold the power button for 3 seconds to turn it on. Press and hold the power button again for 5 seconds to turn it off. Mode selection Press the mode button once to change modes between Bluetooth®/microSD Card/AUX. Play/pause Press the power button once to play and once again to pause Volume up/Next track Press the (+) button for 2 seconds to skip to the next track. Press once to increase the volume. Volume down/Previous track Press and hold the (-) button for 2 seconds to skip to the previous track. Press once to reduce the volume.
Answering/ending calls Press the power button once to answer an incoming call. Press once again to end the call. Rejecting calls Press and hold the power button for 2 seconds to reject an incoming call. Voice assistant Double-click the mode button to activate the voice assistance on your mobile device. Number redial Double-click the power button to redial the most recent contact on your call log.
Specifications
- Bluetooth® version V5.3
- Driver Ø 44mm
- Speaker sensitivity 108 ± 3dB
- Impedance 32Ω
- Frequency response 20Hz-20KHz
- Input voltage 5V⎓1A
- Battery size 500mAh
- Charge time Approx. 3 hours
- Playtime Up to 36 hours
- Charging port type USB-C
- Wireless range Up to 10 meters
- Dimensions 196mm x 182mm x 82mm
- Weight 225g
Support
Should you need to contact Veho for support and troubleshooting for your TV1 Tubevac, please visit our Tech Support page at: veho-world.com/product-support
