ZAGG Coda Pop Portable Bluetooth Speaker User Manual


ZAGG Coda Pop Portable Bluetooth Speaker User Manual


Powering On and Off

Listening Via AUX To turn your CODA POP on, simply slide the selector switch on the bottom to Bluetooth® or AUX. If you choose Bluetooth,the LED light will show red,then,as the CODA POP powers up, you will hear the pop tab sound indicating it is ready to pair. The LED light will also begin alternating between red and blue. To turn your CODA POP off from Bluetooth mode, simply slide the selector switch to OFF. The CODA POP will power down with a refreshing fizz ton our CODA POP using the AUX option, no tone will sound. Simply plug your 3.5mm cable into the speaker and your music device, slide the selector switch to AUX, and then begin enjoying your music. To turn your CODA POP off from AUX mode, simply slide the select or switch to OFF.

Pairing Your CODA POP

Pairing your CODA POP with your music device is quick and easy.It should only need to be paired once using the following directions. If the connection between the CODA POP and your device is ever lost, simply repeat these steps

  1. Make sure your device’s Bluetooth® connection is enabled. You can do this on many devices by accessing the SETTINGS menu then choosing GENERAL BLUETOOTH® ON.
  2. Turn your CODA POP on by sliding the selector switch to the Bluetooth® option. Wait for the pop tab sound that indicates it is ready to pair.
  3. Your music device will show “CODA POP” as an available device. Select this option to begin pairing.
  4. When the CODA POP is paired with your device, the LED light will flash blue periodically.
  5. Enjoy the refreshing sounds of your music.

Listening Via AUX

To enjoy the powerful sounds of your CODA POP using the AUX mode, simply follow these steps:

  1. Plug a 3.5mm cable into the AUX port.
  2. Connect your music device by using the other end of the 3.5mm cable (or AUX cable).
  3. Slide the selector switch to AUX.
  4. Make sure both ends of the 3.5mm cable are seated properly and begin playing your music from your device.
  5. Enjoy

Switching Between Bluetooth and AUX Modes

If you are enjoying your CODA POP in Bluetooth® mode and want to switch to AUX, you must first power the CODA POP down completely and wait for the power down tone to sound. Only after the power down tone has sounded can you then switch to AUX mode and begin enjoying your music via a 3.5mm cable. If you wish to switch from AUX to Bluetooth®, you can simply slide the selector switch to Bluetooth® and pair the CODA POP to your music device. You do not need to wait for it to power down.

Charging Your Coda Pop

Your CODA POP comes with a battery that packs a punch and can keep your music flowing until the party’s over. When you do need to charge it, simply follow these steps:

  1. Plug the included power cord into the CODA POP’s DC jack.
  2. Plug the USB end of the included charging cable into the charging device you prefer (ZAGG Sparq, your computer, a wall outlet converter, etc.).
  3. While your CODA POP is charging, the LED light will be red.
  4. When charging is complete the LED light will turn blue. It typically takes 2-3 hours for the CODA POP to charge fully.
  5. When fully charged, your CODA POP speaker provides 2-3 hours of continuous music.

Conference Calls

Your CODA POP also allows you to take calls hands-free. Its built-in microphone transmits your voice cleanly while the Coda Pop speaker projects their voice crisply and clearly. To take a call on your CODA POP, follow these steps:

  1. Restart your music device.
  2. Turn your CODA POP off and back on. You should see the LED light illuminate, if not, charge your CODA POP.
  3. After charging,turn your CODA POP on.If the LED light still does not illuminate, and your speaker doesn’t operate correctly,please contact ZAGG’s customer support.
  4. Re-pair your CODA POP with your device by sliding the selector switch to Bluetooth®.
  5. Your music device should display “CODA POP” as an available device.Select it.
  6. If your music device gives you an error message, repeat the pairing process*.

If you continually receive the same error message during pairing, or the above steps don’t work, please contact ZAGG’s customer support for assistance.

Warranty Registration

Your CODA POP speaker comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your CODA POP as well as keep your purchase receipt. If you purchased your CODA POP from, ZAGG® has already registered it and has a copy of your proof of purchase. iFrogz  is a ZAGG® Inc brand.


Leave a Reply