Fresh n Rebel 3AEP200 Wireless In-Ear Headphone User Manual
Contents
Charging
Specifications
- Bluetooth 5.0
- Working Range: up to 10m
- Operating Frequency band: 2400 to 2483.5 MHz
- Maximum radio frequency power transmitted: 1.69 dBm / 1.48 mW
- Driver diameter: 2x 10mm
- Sensitivity: 102dB ± 3dB
- Frequency Response: 20Hz-20000Hz
- Impedance: 16 Ohm
- Built-in rechargeable Lithium battery 3.7V / 100 mAh
- Battery Charging (Micro USB): 5.0V ± 0.5 V
- Play Time: approximately 8 hours
- Charge Time: approximately 2 hours
- Integrated microphone and volume control
- Charging cable: USB-A to Micro USB, 50 cm
FCC WARNING
Always follow all instructions and warnings closely. Avoid abrupt changes in temperature. Do not burn or incinerate.
CAUTION: This products contains a rechargeable 3.7V 100mAh Lithium battery. Do not open the device and do not try to retrieve or replace the battery. To avoid possible environmental pollution, the device must be disposed of at a recycling centre. Always keep the volume on your in-ear headphones low enough to hear people talking, sounds that might alert you to hazardous conditions, and better protect your hearing. Individual susceptibility to noise-induced hearing loss and potential hearing problems varies. To minimize the potential for hearing damage, keep the volume low enough that you can carry on a conversation with people nearby.
