Anker 521 Power Strip Charging Station With 3 Outlets User Guide
Overview
A . AC Outlet
B . Surge Protection Light
C . Grounded Light
D . USB-C Port
E . USB-A Port
Using Your Power Strip
Tip: The surge protection feature can protect your computers, smartphones and other electronic equipment against voltage fluctuations, surges, and spikes. If the surge protection light is , it indicates that surge protection is not functioning normally.
Safety
- Do not connect the power strip to an ungrounded outlet.
- Do not use with extension cords.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Install the power strip away from heat-emitting appliances such as radiators.
- Keep children away from the power strip.
- If you want to clean the product, only use a dry cloth or brush. The product is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Specifications
| AC Input | 125V AC 60Hz 10A |
| AC Output | 125V AC 60Hz 10A 1250W (Total 1250W for socket-outlet） |
| Surge Energy | 300J |
| USB-A Output | 5V 2.4A in total (2.4A Max Per Port) |
| USB-C Output | 5V 3A/9V 3A/15V 2A/20V 1.5A |
| Size | 116 x 50 x 32 mm |
| Cable Length | 5 ft |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DOWNLOAD PDF
Anker 521 Power Strip Charging Station With 3 Outlets User Guide
