Aqara HE1-G01 Smart Home Hub User Manual

Aqara HE1-G01 Smart Home Hub User Manual

Product Introduction

Hub E1 is a new hub launched by Aqara, which is USB-powered and supports the Zigbee 3.0 protocol. With a small size and flexible installation, it can be installed and applied on sockets and electrical appliances with USB ports in the home and works with a variety of accessories, which can be used as a Wi-Fi repeater for data forwarding.

Quick Setup

Connect to the Aqara Home app
Download the App
Scan the following QR code or search for “Aqara Home” in the App Store to download and install the Aqara Home app.

Set the hub

1. Plug the hub into a USB port that can provide power, wait for the yellow indicator to flash quickly, and make sure your mobile phone is connected to a Wi-Fi network in the 2.4 GHz frequency band.
   • Please keep the mobile phone as close to the hub as possible, and make sure that the mobile phone and the hub are using the same Wi-Fi network
2. Open the Aqara Home app, click “+” in the upper right corner of the home page, select “Hub E1”, and follow the instructions of the app to operate.
   • Connect to HomeKit: Please scan or manually input the HomeKit on the hub nameplate to set the code according to the prompts of the Apple “Home” app, and then follow the prompts to operate. Please properly protect the HomeKit on the nameplate to set the code. Once added successfully, the added hub can be viewed in the Apple “Home” app.
3. If the addition fails, please long press the hub button for 10s to reset the network, and then add it again in the app. Please log in to the following website to ask for help: www.aqara.com/support.

Usage
Add accessory: After the hub is added successfully, please refer to the manual of the accessory for adding. When an accessory is successfully added, the accessory that is HomeKit compatible will automatically sync to HomeKit, which can be viewed on the Apple “Home” app. This product can be used as a Wi-Fi repeater device with an open network hotspot.

Please turn on the repeater function in the app. It allows to modification of the default SSID and password, supports a maximum of 4Mbps data forwarding capacity, and can access two Wi-Fi devices at most, which is recommended to connect with only one subordinate Aqara product (such as camera and hub).

Installation Description

Hub E1 is a new hub launched by Aqara, which is USB-powered and supports Zigbee 3.0 protocol. With a small size and flexible installation, it can be installed and applied on sockets and electrical appliances with USB ports in the home and works with a variety of accessories, which can be used as a Wi-Fi repeater for data forwarding.

1. To ensure stable communication between the hub and each accessory, the hub is recommended to be installed in the center of the area where the accessory is located.
2. If there is no shelter in the room, the communication distance between the hub and the accessory can be up to 30 meters.

Indicator Description

Specifications

• Product Model: HE1-G01
• Input Voltage: 5V0.5A
• Operating Temperature: -10℃~40℃ (14°F~104°F)
• Product Dimensions: 108×30×8 mm (4.25×1.18×0.31 in.)
• Wireless Protocol: Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee 3.0
• Operating Humidity: 0~95% RH, no condensation

Notice
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit-enabled Hub E1 is secured by HomeKit technology. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Warnings

1. This product is NOT a toy. Please keep children away from this product.
2. This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
3. Beware of moisture, do NOT spill water or other liquids onto the product.
4. Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
5. Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
6. This product is only suitable for improving the convenience of your home life and reminding you about the status of your devices. It should NOT be used as security equipment for homes, buildings, warehouses, or any other places. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.

Under normal use conditions, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

REFERENCE LINK