AUDIO SONIC Stereo Radio CD-1593 User Manual featured

AUDIO SONIC Stereo Radio CD-1593 User Manual

AUDIOSONIC logo

AUDIO SONIC Stereo Radio CD-1593 User Manual

AUDIO SONIC Stereo Radio CD-1593 User Manual

SAFETY INSTRUCTIONS

By ignoring the safety instructions the manufacturer can not be hold responsible for the damage.

EXCLAMATION POINT

within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reason.

LIGHTNING FLASH WITH ARROWHEAD SYMBOL

within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous
voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

  • The AC/DC adaptor and main unit shall not be exposed to dripping or splashing; no objects filled with liquids, such as vases, shall be placed on the
    apparatus.
  • The AC/DC adaptor of the apparatus should not be obstructed or should be easily accessed during the intended use.
  • To completely disconnect the power input, the AC/DC adaptor of the apparatus should be disconnected from the mains, as the disconnected device is the AC/DC adaptor of apparatus.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard

Warning:

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

PARTS DESCRIPTION

  1. LCD Display
  2. Standby / Function
  3. Band / Album
  4. Sleep / Time set
  5. Vol + / Alarm 1
  6. Vol – / Alarm 2
  7. USB slot
  8. Play / Pause
  9. Stop
  10. Mode
  11. Skip +
  12. Skip –
  13. CD door
  14. Snooze
  15. Tuning control
  16.  FM Antenna
  17. AC power cord
  18. Aux- in Jack

AUDIO-SONIC-Stereo-Radio-CD-1593-1

BEFORE THE FIRST USE

  • Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
  • Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the dev

POWER SOURCES
AC power

You can power your portable system by plugging the detachable AC power cord into the AC inlet at the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance.

Battery power

Insert 6 x “C” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove the batteries when appliance will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your appliance.

Note

  • Use batteries of the same type. Never use different types of batteries together.
  • When using the appliance with batteries, disconnect the AC power cord.

USE
Basic function

  • Press the “ST / FUNC” button in the standby mode, to switch on the system. (FM radio mode as default mode when switch on the system.)
  • Press the “ST / FUNC” button to switch the system to CD/MP3/USB/AUX-IN mode.
  • Press and hold the “ST / FUNC” button for 3 seconds to switch off the system. (No matter in which mode.)

Radio

  • Press the “ST / FUNC” button to select the “RADIO” mode.
  • Press the “BAND / ALBUM” button to select AM or FM.
  • Adjust radio frequency to your desired station by using the “TUNING” control.

For better reception

  • FM: This appliance has a FM antenna located at the rear cabinet. Make sure this antenna is fully extended.
  • AM: This appliance is equipped with a built – AM antenna. Rotate the appliance to get better reception.

CD / MP3 operation

  •  Press the “ST / FUNC” button to select “CD” mode.
  • Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
  •  Close the CD door.
  •  Focus search is performed when: – For CD disc – Total number of tracks is read and appears on the display. – For MP3 disc – “MP3” appears on the display.”
  • It will start automatically from the first track.
  • Press the “VOL+/ AL1” or“VOL -/ AL 2” button to adjustthe volume to the desired level.
  • Press the “PLAY / PAUSE” button again when you want to stop playback temporarily.
  •  Press the “STOP” button when finished.

Folderselect

Press the “BAND / ALBUM” button to select a folder. (Folder select function can only operate if the discis stored with at least 2 directories / files.)

Program

  •  Up to 20 tracks of CD disc, 99 tracks of MP3 disc can be programmed for disc play in any order. Be sure to press the “STOP” button before use.
  •  Press the “MODE” button, the display will show “P01”.
  • Select desired track by using the “SKIP +” or “SKIP -” button. (You may select adesired album by pressing the “ALBUM” button).
  • Press the “MODE” button again to confirm the desired track into the program memory.
  • Repeat step 2 and 3 to enter additional tracks into the program memory
  • When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to play the disc in the order you have programmed.
  • Press the “STOP” button twice to terminate programmed playback.

Press the “MODE” button during playing CD / MP3 disc, each press switches the
mode function as follows:

  • Repeat 1
  • Repeat album ( *mp3 only )
  • Repeat all
  • Random
  • Normal playback

USB operation

  • Plug your USB device into the port.
  • Press the “FUNCTION” button to select “CD” mode.
  • If there is no disc on the disc tray. It will read and play automatic your USB device.
  • If There is a disc on the disc tray. It will read and play automatic your DISC,
  • Press and hold the “PLAY / PAUSE” button for a few seconds to entry USB mode when playing CD.
  • Playback will start automatically from the first track and the display will show “USB”.
  • Press the “STOP” button when you’re finished.

Programmer mode

The programmer mode works the same as the CD / MP3 programmer mode.

Aux in

  • Connect an external audio source to the device by plugging it in the aux in jack.
  • Press the power button to turn on the device.
  • Use the native controls on the external audio source to start playing music

Clock setting

  • Press and hold the “ST / FUNC” button to switch unit in the standby mode.
  • Press and hold the “SLEEP / TIME SET” button to entry the clock set mode. The display will show “24H” and is flashing.
  • Adjust the time format (12H / 24H) by pressing the “SKIP +” or “SKIP -” button.
  • Press the “SLEEP / TIME SET” button to confirm the time format, the display will show “AM 12:00” if 12H format is set or “0:00” if 24H is set.
  • Adjust the hour by pressing the “SKIP +” or “SKIP -” button, press the “SLEEP / TIME SET” button to confirm.
  • Adjust the minutes by pressing the “SKIP +” or “SKIP -” button, press the “SLEEP /TIME SET” button to confirm.
  • Notes: Because the clock setting is at standby mode, the display is dim.

Alarm setting

  • Alarm setting must be after completed clock setting.
  • Press and hold the “ST / FUNC” button to switch unit at standby mode.
  • Press the “VOL + / AL 1” or “VOL – / AL 2” button to entry alarm set mode.
  •  Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “VOL + / AL 1” or “VOL – / AL 2” button to confirm.
  • Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “VOL + / AL 1” or “VOL – / AL 2” button to confirm.
  • Pressing the “SKIP +” or “SKIP -” button to select BUZZ RADIO CD USB
  •  Press the “VOL + / AL 1” or “VOL – / AL 2” button to confirm.
  •  Adjust alarm volume by pressing the “SKIP +” or “SKIP -” button, press the “VOL + / AL 1” or “VOL – / AL 2” button to confirm.
  • After confirm the alarm volume, the display will automatically scan your setting one time.
  • The display will show “1” or “2”. Alarm seting is now complete.
  • Press the “VOL + / AL 1” or “VOL -/ AL 2” button to activate the alarm on / off function.
  • Note: If you need to reset the alarm, press and hold the “VOL + / AL 1” or “VOL – / AL 2” button for 3 seconds to re-entry the alarm set mode.

Snooze
When the alarm is triggered. You may press the “SNOOZE” button to delay the alarm for another 9 minutes.

Sleep

  • In CD mode, press and hold the “SLEEP / TIME SET” button for 3 seconds, the display will show “SLEEP 90”. That means, after 90 minutes the appliance will automatically turn to the standby mode.
  • Press the “SLEEP” button again to select the automatically turn off time, from 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes.
  • Press the “SLEEP” button to “SLEEP 00” to cancel the sleep function.

CLEANING AND MAINTENANCE

  • Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
  • Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

GUARANTEE

  • This product is guaranteed for 24 months granted. Your warranty is valid if the product is used in accordance to the instructions and for the purpose for which it was created. In addition, the original purchase (invoice, sales slip or receipt) is to be submitted with the date of purchase, the name of the retailer and the item number of the product.
  • For the detailed warranty conditions, please refer to our service website

This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection

Leave a Reply