BEURER BF 70 Body Analysis Scale User Manual
IMPORTANT SAFETY INSTRUCTIONS
- Do not use any abrasive cleaning products and never submerge the device in water.
- Make sure that no liquids come into contact with the scale. Never submerge the scale in water. Never rinse it in running water.
- Protect the device from knocks, damp, dust, chemicals, marked temperature fluctuations and nearby sources of heat (ovens, heaters).
- Do not press the buttons violently or with pointed objects.
- Do not expose the scale to high temperatures or strong electromagnetic fields.
- The scale’s capacity is 400 lb (181.4 kg, 28.5 st). The results for weight and bone mass are displayed in 0.2 lb (100g) increments.
- Calorie requirement is indicated in steps of 1 kcal.
- Repairs must only be performed by Beurer Customer Service.
Introduction
This digital body analysis scale is intended for measuring body weight and providing an analysis of your personal fitness data. use only.the scale has the following functions that can be used by up to eight persons:
- Body weight in lb/kg/st
- Body fat percentage BF in %
- Body water percentage in %
- Muscle percentage in %
- Bone mass in lb/kg/st
- Basal metabolic rate and active metabolic rate
Package Contents
- 1 x BF 70 Body Analysis Scale
- 3 x 1.5 V AAA-size alkaline batteries
- 1 x Instruction manual
- 1 x Quick start guide
Parts and Controls
- Display
- Conductors
- Battery Compartment (at rear)
- Reset Button (at rear)
- Bluetooth® Pairing Icon
- User Initials (if recognized)
- Body weight
- Other Measurement Data (BMI, Body Fat Percentage, etc.)
Initial Use
Battery Installation
Remove the Battery Compartment Cover and insert three AAA-size alkaline batteries (included) according to the indicated polarity. If the scale does not function, remove the batteries and reinsert them, ensuring proper polarity. Replace Battery Compartment Cover.
Positioning the Scale
Place the scale on a hard, flat surface with no carpet or rugs; a hard surface is required for accurate measurements.
Taking Measurements
NOTE: Do not let your feet, legs, calves or thighs touch each other.
- The scale first displays the weight. If you are barefoot, BIA diagnostics will follow.
Other functions
User assignment
It is possible to assign up to eight users for weight-only measurement (with shoes) or analysis (bare feet). For a new measurement, the scale assigns a measurement to the user whose most recently saved measurement is within 4 lb or 2 kg of the active measurement and within 2% of the body fat.
Unknown measurements
If a measurement cannot be assigned to a known user, it is stored as an unknown measurement. Up to 20 unknown measurements can be saved. Use the app to directly assign unknown measurements to a user.
Saving the assigned measurements on the scale
Data synchronization takes place within 10 seconds.
Deleting scale data
To delete all measurements and old user data on the scale, switch on the scale and press and hold the reset button for three seconds; ‘dEL’ will appear in the LCD Display.
Care and Maintenance
Replacing Batteries
Your scale is equipped with a low battery indicator. If the batteries are weak, ‘ ’ will appear in the LCD Display and the scale will automatically shut off.
Cleaning
Clean the scale periodically using a damp cloth and, if necessary, a small amount of mild detergent.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations. If you have any questions, please contact the local authorities responsible for waste disposal.
FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty
Limited Lifetime Warranty For Original Purchaser Your Beurer daylight lamp, Model TL 30, excluding the battery, is warranted to be free from defects in materials and workmanship for the life of the product under normal conditions of intended use and service. This warranty extends only to the original retail purchaser and does not extend to retailers or subsequent owners. We will, at our option, repair or replace the Beurer daylight lamp, Model TL 30, without additional charge, for any part or parts covered by these written warranties.
No refunds will be given. Repair or replacement is our only responsibility and your only remedy under this written warranty. If replacement parts for defective materials are not available, Beurer reserves the right to make product substitutions in lieu of repair or replacement. For warranty service contact our customer service department at 1-800-536-0366 or at info@beurer.com to provide a description of the problem.
If the problem is deemed to be within the scope of the limited lifetime warranty, you will be asked to mail the product at your cost in its original package with proof of purchase, your name, address, and phone number. If the problem is not deemed to be within the scope of the limited lifetime warranty, we will provide a quotation for repair respectively replacement, and return shipping fee.
This warranty is effective only if the product is purchased and operated in the country in which the product is purchased. A product that requires modifications or adaptation to enable it to operate in any other country than the country for which it was designed, manufactured, approved, and/or authorized, or repair of products damaged by these modifications is not covered under this warranty.
