BEURER BM 54 Bluetooth Featured image

BEURER BM 54 Bluetooth User Manual


BEURER BM 54 Bluetooth Manual

BEURER BM 54 Bluetooth Product image

Dear Customer,
thank you for choosing a product from our range. Our name stands for high-quality, thoroughly tested products for applications in the areas of heat, weight, blood pressure, body temperature, pulse, gentle therapy, massage, beauty, and air. Please read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain. Best regards, Your Beurer Team.

Intended use

The BM 54 upper arm blood pressure monitor is intended for home use and serves as a non-invasive way of measuring and monitoring arterial blood pressure and pulse values in adults with an upper arm circumference of 22-44 cm. As a result, you can quickly and easily measure your blood pressure and pulse and view various average values from previous measurements. The recorded measurements are classified and evaluated graphically. A symbol in the display also warns of possible existing cardiac arrhythmia.

Warnings and safety notes

  • In order to ensure comparable values, always measure your blood pressure at the same time of day.
  • Do not take a measurement within 30 minutes of eating, drinking, smoking or exercising.
  • Before the initial blood pressure measurement, make sure always to rest for about 5 minutes.
  • Furthermore, if you want to take several measurements in succession, make sure always to wait for at least 1 minute between the individual measurements.
  • Repeat the measurement if you are unsure of the measured value.
  • The measurements taken by you are for your information only they are no substitute for a medical examination! Discuss the measured values with your doctor and never base any medical decisions on them (e.g. medicines and their dosages).

Notes on electromagnetic compatibility

  • The device is suitable for use in all environments listed in these instructions for use, including domestic environments.
  • The use of the device may be limited in the presence of electromagnetic disturbances. This could result in issues such as error messages or the failure of the display/device.
  • Avoid using this device directly next to other devices or stacked on top of other devices, as this could lead to faulty operation. If, however, it is necessary to use the device in the manner stated, this device as well as the other devices must be monitored to ensure they are working properly.
  • The use of accessories other than those specified or provided by the manufacturer of this device can lead to an increase in electromagnetic emissions or a decrease in the device’s electromagnetic immunity; this can result in faulty operation.
  • Failure to comply with the above can impair the performance of the device.

Device description

BEURER BM 54 Bluetooth FIG 1

  1. Cuff
  2. Cuff line
  3. Cuff connector
  4. Display
  5. Memory buttons M1/M2
  6. START/STOP button
  7. Risk indicator
  8. Connection for cuff connector (left-hand side)

Initial use

BEURER BM 54 Bluetooth FIG 2

Inserting the batteries

  • Remove the battery compartment lid on the rear of the device.
  • Insert four 1.5 V AAA (alkaline type LR03) batteries. Make sure that the batteries are inserted the correct way around in accordance with the
    markings. Do not use rechargeable batteries.
  • Close the battery compartment lid again carefully.


Ensure the device is at room temperature before measuring. The measurement can be performed on the left or right arm.

Attaching the cuff

BEURER BM 54 Bluetooth FIG 3


  • Place the cuff onto the bare upper arm. The circulation of the arm must not be hindered by tight clothing or similar.
  • The cuff must be placed on the upper arm so that the bottom edge is positioned 2 – 3 cm above the elbow and above the artery. The line should point to the center of the palm.
  • Now tighten the free end of the cuff, but make sure that it is not too tight around the arm and close the hook-and-loop fastener. The cuff should be fastened so that two fingers fit under the cuff.

Cleaning and maintenance

  • Clean the device and cuff carefully using a slightly damp cloth only.
  • Do not use any cleaning agents or solvents.
  • Under no circumstances hold the device and cuff under water, as this can cause liquid to enter and damage the device and cuff.
  • If you store the device and cuff, do not place heavy objects on the device and cuff. Remove the batteries. The cuff line should not be bent sharply.

Accessories and replacement parts

Accessories and replacement parts are available from the corresponding service address (according to the service address list). Please state the corresponding order number.

BEURER BM 54 Bluetooth FIG 4

What if there are problems?

BEURER BM 54 Bluetooth FIG 5

Technical specifications

  • Model no… BM 54
  • Measurement method… Oscillometric, non-invasive blood pressure measurement on the upper arm.
  • Measurement range… Cuff pressure 0-250 mmHg, systolic 50-250 mmHg, diastolic 30-200 mmHg, pulse 40-180 beats/minute
  • Data transfer via Bluetooth® wireless technology… The blood pressure monitor uses Bluetooth® low energy technology, 2402 MHz – 2480 MHz


Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows. The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales agreement with the buyer. The warranty shall apply without prejudice to any mandatory statutory provisions on liability. Beurer guarantees the perfect functionality and completeness of this product.

The worldwide warranty period is 5 years, commencing from the purchase of the new, unused product from the seller. The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the context of domestic use. German law shall apply. During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.

A warranty claim shall only be considered if the buyer can provide Beurer, or an authorized Beurer partner, with a copy of the invoice/purchase receipt, and the original product. The following are explicitly excluded from this warranty: – deterioration due to normal use or consumption of the product;

  • damage that arises during transport between manufacturer and customer, or between the service center and customer;
  • products purchased as seconds or as used goods;
  • consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liability or other compulsory statutory liability provisions).

Repairs or exchanges in full do not extend the warranty period under any circumstances.




Leave a Reply