BOSE 600 Smart Soundbar Bluetooth Featured image

BOSE 600 Smart Soundbar Bluetooth User Manual

BOSE LOGO

BOSE 600 Smart Soundbar Bluetooth

BOSE 600 Smart Soundbar Bluetooth Product imageIMPORTANT SAFETY INSTRUCTIONS

  • To reduce the risk of fire or electrical shock, do NOT expose this product to rain, dripping, splashing, or moisture and do not place liquid-filled objects such as vases, on or near the product.
  • Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
  • Do NOT make unauthorized alterations to this product.
  • Do NOT use a power inverter with this product.
  • Do NOT use in vehicles or boats.
  • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  • Only use the following hardware to mount this product: Bose Soundbar Wall Bracket.
  • When positioning the product, make sure it is not blocking any ventilation openings on your TV or monitor. Refer to the owner’s guide that came with your TV or monitor and install in accordance with the manufacturer’s instructions.
  • Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall cavity or in an enclosed cabinet.
  • Do not place or install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Keep batteries out of reach of children.
  • Batteries may cause a fire or chemical burn if mishandled. Do not recharge, disassemble, heat, or incinerate.
  • The battery provided with this product may present a risk of fire, explosion or chemical burn if mishandled, incorrectly replaced or replaced with an incorrect type.

CONTENTS

Confirm that the following parts are included:

BOSE 600 Smart Soundbar Bluetooth FIG 1

May ship with multiple power cords. Use the power cord for your region.
NOTE: If any part of the product is damaged, don’t use it. Contact your authorized Bose dealer or Bose customer service. Visit: support.Bose.com/SB600

BOSE MUSIC APP SETUP

The Bose Music app lets you set up and control the soundbar from any mobile device, such as a smartphone or tablet. Using the app, you can stream music, add music services, explore internet radio stations, configure Amazon Alexa, enable Chromecast built-in, choose your voice prompt language, manage soundbar settings, and get new features.
NOTE: If you have already created a Bose Music account for another Bose product, add the soundbar to your existing account (see page 20).

DOWNLOAD THE BOSE MUSIC APP

  • On your mobile device, download the Bose Music app.
  • BOSE 600 Smart Soundbar Bluetooth FIG 2Follow the app instructions.

SOUNDBAR CONTROLS

The soundbar controls are located on the top of the soundbar and on the remote.
TIP: You can also control your soundbar using the Bose Music app.

REMOTE FUNCTIONS

Use the remote to control the soundbar, select the source, and manage Bluetooth connections.

BOSE 600 Smart Soundbar Bluetooth FIG 3Power on/off
On the remote, press the Power button I to power the soundbar on/off.

BOSE 600 Smart Soundbar Bluetooth FIG 4When powered on, the soundbar defaults to the last active source.

NOTES: 

  • When you plug the soundbar into an AC (mains) outlet, the soundbar automatically powers on.
  • You can still access Amazon Alexa and control the soundbar with your voice using your Google Assistant-enabled device when the soundbar is powered off.

TIP: You can also use Bose Voice4Video™ along with Amazon Alexa to power the soundbar on/off (see page 30).

Auto-wake (optical connection only)

You can set the soundbar to power on whenever a sound signal is received. To toggle between auto-wake and default power settings, press and hold I for 5 seconds until you hear a tone and the light bar pulses white twice.

TIP: You can also control auto-wake using the Bose Music app. You can access this option from the Settings menu.

Sources
On the remote, press the appropriate button (TV O, Bluetooth l, or Bose Music app m) to select the source.

BOSE 600 Smart Soundbar Bluetooth FIG 5

TIPS: 

  • You can also use Bose Voice4Video™ along with Amazon Alexa to select your Bluetooth source (see page 30).
  • You can also use the Bose Music app to select a source.

CARE AND MAINTENANCE

UPDATE THE SOUNDBAR
The soundbar updates automatically when connected to the Bose Music app and your Wi-Fi network.

REPLACE THE REMOTE BATTERY

  • Using a coin, turn the battery compartment cover left (counter-clockwise) and remove the cover.
  • BOSE 600 Smart Soundbar Bluetooth FIG 6Insert the new battery flat side up, with the H symbol facing up.

BOSE 600 Smart Soundbar Bluetooth FIG 7NOTE: Use only an agency approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery.

  • Reset the cover and turn it right (clockwise) to lock it in place.

CLEAN THE SOUNDBAR

Wipe the outside surfaces of the soundbar with a soft, dry cloth.

CAUTIONS:

  • Do NOT allow liquids to spill onto the soundbar or into any openings.
  • Do NOT blow air into the up-firing speakers or soundbar.
  • Do NOT use a vacuum to clean the up-firing speakers or soundbar.
  • Do NOT use any sprays near the up-firing speakers or soundbar.
  • Do NOT use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
  • Do NOT allow objects to drop into any openings.

Auto-wake (optical connection only)
You can set the soundbar to power on whenever a sound signal is received.
To toggle between auto-wake and default power settings, press and hold I for 10 seconds until you hear a tone and the light bar pulses white twice.

TIP: You can also control auto-wake using the Bose Music app. You can access this option from the Settings menu.

TROUBLESHOOTING

SYMPTOMSOLUTION
 

No HDMI eARC port on your TV

Use your TV’s HDMI ARC port.

If your TV doesn’t have an HDMI ARC port, use the optical cable to connect the soundbar to your TV.

 

 

No HDMI eARC, HDMI

ARC, or optical port on your TV

If your TV is connected to a cable or satellite box, connect the HMDI cable from the soundbar to the cable or satellite box.

Connect to your TV using an audio converter and separate audio cables, such as a coaxial, 3.5 mm, or an analog audio cable (not provided). The type of converter and cable you need depends on the audio output ports available on your TV.

 

 

Soundbar doesn’t power on

Plug the power cord into a different AC (mains) outlet.

Use the remote control to power on the soundbar

Unplug the power cords for the soundbar and optional bass module or surround speakers, wait 30 seconds, and plug them firmly into a live AC (mains) outlet.

 

REFERENCE

https://assets.bose.com/content/dam/Bose_DAM/Web/consumer_electronics/global/products/speakers/bose_smart_soundbar_600/pdf/877935_og_smart-soundbar-600_en.pdf

DOWNLOAD PDF

877935_og_smart-soundbar-600_en_compressed

Leave a Reply