Cleer Ally Plus Noise Canceling Headphone Manual
INTRODUCTION
Box contents
Overview
QUICK START GUIDE
- ALLY PLUS will power ON automatically when removed from the
charging case- ALLY PLUS will go into pairing mode automatically when powered ON for the first time (if you need to manually go into pairing mode, please follow the steps on page 4)
- ALLY PLUS will automatically connect to the last connected device if it is in range and available for pairing.
- Find “Cleer ALLY PLUS” on the Bluetooth device list to pair the first earbud
- After a few seconds, a Bluetooth pairing request pop-up window will appear, press “PAIR” to connect the
second earbud - Enjoy your ALLY PLUS.
USER MANUAL
- Remove both earbuds from the charging case
- Press the touch pad on either earbuds 3 times, on the third press hold for 2s
- Select your “Cleer ALLY PLUS” on the Bluetooth device list to pair the first earbud
- After a few seconds, a Bluetooth pairing request pop-up window will appear, press “PAIR” to connect the
second earbud - ALLY PLUS is now paire
To clear the pairing record of your ALLY PLUS:
- Remove both earbuds from the charging case
- Put both earbuds into pairing mode
- Press and hold the touch pad until the LEDs on the earbuds flash red 3times
- Return the earbuds to the charging case and leave them there for 10 seconds
- The pairing record is now cleared.
Volume control
Noise Cancellation Mode and Ambient Mode
- Cycle thru Noise Cancellation Mode ON, Ambient Mode ON and ALL OFF
- Noise Cancellation Mode: Our noise canceling technology and optimized passive isolation can suppress wide-band ambient noise
Ambient Mode: Allows you to hear sounds around you even while wearing your ALLY PLUS - ALLY PLUS is set to Noise Cancellation Mode when powered ON.
Specifications
- Driver: 10mm neodymium dynamic driver
- Audio CODEC support: SBC, AAC, aptXgh
- Frequency response range: 20 – 20,000Hz
- Connections
- USB-C cable for case charging
- Battery charging:
- A 5-minute charge delivers up to 1-hour playback; less than 2 hours for a full charge (when charging unit via USB-C cable and charging case)
- Playback time:
- Up to 10 hours, up to additional 20 hours with charging case
Support: BT 5.0, A2DP v1.3, AVRCP v1.6, HFP v1.7, HSP v1.2 - Bluetooth transmission 2.402-2.480GHz
- frequency range: 2.402-2.480GHz
- Bluetooth transmission power: <8.0dBm
- Water resistance rating: IPX4 (for earbuds only)
- Weight: 6.6g (per earpiece), 79.6g (both earpieces and case)
Cleer Limited Warranty
Cleer Limited warrants this product against defects in material or workmanship for (1) year as set forth below when purchased directly from Cleer Limited or a Cleer Limited retailer. Pursuant to this Limited Warranty, Cleer Limited will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies.
Labor: For a period of (1) year from the original date of purchase of the product (“Labor Warranty”), Cleer Limited will, at its option, repair or replace with new or refurbished product,product determined to be defective. If Cleer Limited elects to replace the product after this Labor Warranty has expired but while the parts warranty is still in effect, it will do so for the applicable labor charge.
Parts: For a period of (1) year from the original date of purchase of the product (“Parts Warranty”),Cleer Limited will supply new or refurbished replacement parts in exchange for parts determined to be defective. This Limited Warranty covers only the hardware components packaged with the Product. It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the Product; any such software is provided “AS IS” unless expressly provided for in any enclosed software Limited Warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with
respect to the software.
Instructions
To obtain warranty service, you must deliver the Product, freight prepaid, in either its original packaging or packaging according an equal degree of protection to the original Cleer Limited retailer (point of purchase) or Cleer Limited Customer Service. It is your responsibility to backup any data, software or other materials you may have stored or preserved on your unit. It is unlikely that such data, software or other materials will be lost or reformatted during service and Cleer Limited will not be responsible for any such damage or loss.
A dated purchase receipt from Cleer Limited or a Cleer Limited retailer is required. For specific instructions on how to obtain warranty service for your product, Visit the Cleer Limited website: www.cleeraudio.com Following warranty service your original Product or a replacement Product will be returned to you as your Product was configured when originally purchased.
Repair / Replacement Warranty: This Limited Warranty shall apply to any repair, replacement part or replacement product for the remainder of the original Limited Warranty period or for (90) days, whichever is longer. Any parts or product replaced under this Limited Warranty will become property of Cleer Limited.
REFERENCE
https://cleeraudio.com/headphone
