COMFEE CPC60D7ASB Electric Cooker featured

COMFEE CPC60D7ASB Electric Cooker Manual


COMFEE CPC60D7ASB Electric Cooker Manual

COMFEE CPC60D7ASB Electric Cooker




  1. Do not touch hot surfaces of pressure cooker. Use handles only.
  2. To protect against electric shock, do not immerse cord, plugs, or outer vessel in water or other liquids.
  3. This appliance should not be used by or near children or individuals with certain disabilities.
  4. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
  5. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  6. Use of accessories not specifically recommended by the appliance manufacturer may cause injuries or damage to the unit.
  7. For household use only. Do not use outdoors.
  8. Do not let power cord hang over edge of table or counter, or touch hot surfaces.
  9. Do not place the appliance on or near a hot gas or electric burner, or a heated oven.
  10. Extreme caution must be used when moving a pressure cooker containing hot liquids or foods.
  11. Always attach plug to appliance first, before plugging into wall outlet. To disconnect, turn control to OFF, then remove plug from outlet.
  12. Do not use appliance for anything other than intended use.
  13. This appliance cooks under pressure. Improper use may result in scalding injury. Make certain unit is properly closed before operating. Please see the “Getting Started” section.



  1. Before using your Electric Pressure Cooker for the first time, remove any dust from shipping by wiping clean with a damp cloth.
  2. Thoroughly clean the cooking pot and sealing ring assembly in the dishwasher or with warm, soapy water. Rinse, towel or air-dry, and place in the pressure cooker.


  1. Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side of the exhaust valve and the exhaust valve and float valve of the lid with brush and cloth at least once a month.
  2. Sealing ring: Please remove oil and dirt from the sealing ring with detergent and brush.
  3. Water box: After cooking, the steam may stay in the water box of the external pot as water. Water in the box should be removed for avoiding bad odor, please clean it with clean cloth.

Disassemble and install the block proof cover and seal ring

COMFEE CPC60D7ASB Electric Cooker fig 1


  1. Check if the seal ring and block proof cover are correctly installed in the upper cover before use each time.
  2. After use, please clean the seal ring and around of block proof cover for avoiding jamming the cover, keep it clean to avoid bad odor.
  3. Please do not pull the seal ring, otherwise, the distorted seal ring may influence the seal and pressure effect.
  4. Do not use the damaged seal ring, please replace it at the authorized repair office.


COMFEE CPC60D7ASB Electric Cooker fig 2

  1. Opening the lid correctly
    Hold the handle of upper cover, turn it anticlockwise for about 30°till the lid at unlock state, and then lift the upper cover.
  2. Check if the parts and accessories of lid are well installed
    Check if the floater valve and exhaust valve are jammed, confirm if the sealing ring and block proof cover are correctly installed.
  3. Take out the inner pot, put food content and water into the inner pot
    The total amount of food content and water shall not exceed the Max marked on the inner pot.
  4. Put the inner pot into the cooker
    Wipe to clean the external surface of inner pot, foreign object and water are not allowed on the inner surface of electric pressure cooker; Turn the inner pot to left and right to ensure good contact with the heating plate.COMFEE CPC60D7ASB Electric Cooker fig 3
  5. Safely close the lid
    Before closing the lid, check if the sealing ring is well installed.
    Hold the handle of upper cover, aim the lid in an “unlock state”, put the top cover horizontally on the cooker body, turn the upper cover clockwise for about 30°to the lock place as “Lock State”.
  6. Placing exhaust valve
    When working, please turn the exhaust valve to the sealing location, which means the electric pressure cooker keeps at sealing state;
    For manual exhaust, please turn the exhaust valve handle to the exhaust location, the electric pressure cooker keeps at the exhaust state;
    when exhausting, do not keep the hands or face above the exhaust opening;
    Check if the floater valve drops down before working (before heating, the floater valve is down).


  1. Power on if the buttons are inactive when use, please confirm if the lid is closed at the right place, the buttons are inactive if the lid is not closed correctly.
  2. After cooking, the cooker may automatically enter into the keep warm state.
    The indicator display “0H(0 hour), 1H(1 hour), 2H(2 hour)… “or” L0:00(0 min), L0:01(1 min)….”
    When the cooker is working, it is normal that it makes “clicking” sound. No need to panic.
    To cook small amount of foods, the inner pot may possibly lift when opening the lid, please shake the lid to drop the inner pot in the cooker base and then remove the lid.


  1. Cut off power supply or remove the power plug
  2. Quick Pressure Release
    A. Quickly open the lid (For non-fluid foods)
    Turn the exhaust valve to the exhaust location for exhaust release. For some units, by pressing steam release button “ ” till the float valve drops down.
    B. Generally open the lid
    Keep the electric pressure cooker cool naturally till the float valve drops down.
  3. To Remove Lid
    Turn the upper cover anticlockwise with the left hand, turn it to the cover open limit place, lift the upper cover with the right hand to open the lid.
    Do not open the lid before the pressure in the pot has been completely released, do not open the lid fiercely if it is difficult to open. Do not pull out the exhaust valve when turning the exhaust valve.
    After cooking fluid foods (porridge and soup), do not turn the exhaust valve or press the steam release button please cut off power supply to make it cool naturally till the float drops before opening the lid.




Rated PowerSize of Inner PotWorking


Keep Warm


CPC60D7ASB6 Quart120V~ 60Hz1000W8.66″0-60kPa140° F~176° F


Spoon User Manual Power Cord



COMFEE CPC60D7ASB Electric Cooker fig 4

1Exhaust Valve Handle
2Upper Cover Handle
3Seal Ring
4Control Panel
5Exhaust Opening
6Float Valve (Pressure Indicator)
7Sealing Ring
8Block Proof Cover
9Inner Pot
10Side Handle
11Outer Body

Control Panel

COMFEE CPC60D7ASB Electric Cooker fig 5






Stew Soup/Broth Steam Oatmeal Pressure Cook Egg Bean/Chili Rice

Manual Setting

After standby state (plugged in, lid closed, and display reads off), press “Menu” button, the indicator light is on and the digital screen shows default working time.

The digital screen starts countdown as soon as the pressure rise to working pressure. Enters into keep warm when it finishes working.

For example: Add food and ensure at least a cup of liquid is inside. Plug in and close the lid. Press the Menu button 7 times to get the Pressure Cook LED to light up.Press Level button to rotate the cooking level setting between light, medium, and high. Press the cooking time button and then the + or – button to adjust the cook time. When done, press start to begin the cooking the food.





Delay Timer

Delay cooking: Before the program starts, press “Delay Timer “ button.

The screen shows the preset beginning time. Press “Cooking Timer” button, then press “+” or “-” button to adjust the delay time. Then press “Delay Timer” button to change Hour and Minute. Press “Start” button, the unit starts delay time count- down. When it counts-down to the end, the program starts working.

NOTE: Yogurt、Sauté、Bake、Keep Warm function cannot set

the delay timer.





Before the program starts, you can press the “Level” button to change the internal cooking pressure for “Low” or “Medium” or “High”. Low is more tender and high is less tender.


  1. Clean after each use.
  2. Before cleaning and maintenance, please unplug the power cord until the product cools.
  3. Remove the lid and inner pot, clean with detergent first, then rinse well with water, and wipe dry with a soft cloth.
  4. Clean the internal side of the lid with water, the seal ring, block proof cover, exhaust valve core and float valve can be removed for washing, timely and correctly install them after washing, and then dry the internal side of lid with cloth.
  5. Wipe clean the body of the Pressure Cooker with a rag, and it is prohibited to soak body of the Pressure Cooker in water or spray water to it.
    NOTE: Any other servicing should be performed by an unauthorized service representative.
  6. Periodically clean the cooker and remove oil and dirt if it is stored on the table.
  7. Place the electric pressure cooker 12cm away from other kitchen appliances.


S/NSymptomPossible ReasonsSolutions



Difficult to close the lid

Sealing ring not installed


Position the sealing ring


The floater valve clamps

the push rod

Lightly push the push rod



Difficult to open the lid

Float valve in the popped-

up position

Press the float valve

lightly with a chopstick.

Pressure exists inside the cookerOpen the lid after the pressure is completely






Steam leaks from the lid

Sealing ring installed


Install the sealing ring as


Food debris attached to the

sealing ring

Clean the sealing ring
Sealing ring damagedReplace the sealing ring
The lid is not closed


Close the lid correctly



Steam leaks from float valve

Food debris on the float

valve gasket

Clean the float valve


Float valve gasket worn-outReplace the float valve



Float valve unable to rise

Too little food and water in

inner pot

Add water and food

according to the recipe

Steam leaks from the lid or

exhaust valve

Send to the service center

for repair


Leave a Reply