Dog Care LC01 LED Dog Collar With 7 Light Modes User Manual

Dog Care LC01 LED Dog Collar With 7 Light Modes User Manual

IMPORTANT SAFETY INSTRUCTIONS

WARNING

1. NOT A TOY. This product is not intended for use by, on, or near young children, invalids or infirm persons with reduced physical, sensory, or reasoning capabilities.
2.  CHOKING HAZARD, NOT A CHEW TOY. Ingestion of this product can result in serious injury.
3.  Do not immerse the product in water.
4.   This product is not for traction and should not be used with a leash. Attach a leash to a separate regular collar or a harness.
5.  This product is not recommended for puppies under 3 months of age.
6.  Use only the USB cable provided for charging this product. Do not use with a damaged cable.
7.  Do not store or charge near heat sources.
8.  Use only as described in this manual. Do not use attachments not recommended by Dog Care
9.  To ensure water resistance, cover the rubber plug of the charging port after each charge.
10.   Do not disassemble the product as Incorrect reassembly may result In an electric shock or fire.

NOT A TOY. Close supervision is necessary when used near children.CHOKING HAZARD, NOT A CHEW TOY. This collar is not for traction. Attach a leash to a separate regular collar or a harness. To ensure water , cover the rubber plug of the charging port after each charge.

In the Box

1. Power/Mode button
2. Collar buckle
3.  Charging port and rubber plug

USB cable

Resizing

1. Unscrew the screw at the collar buckle.
2.  Pull the LED collar out of the buckle.
3. Trim the LED collar with scissors to a desired length.

Charging

• Open the rubber plug on the charging port and charge the collar with the included USB cable.
•  To ensure water resistance, cover the rubber plug of the charging port after each charge.

Battery is fully charged when the LED collar is steady green.

Battery is empty and needs charging when the LED collar lights off. Upon pressing the button, the collar will Hash quickly in red to alert you.

The LED collar will flash slowly in red during charging.

It takes approximately 2 hours to fully charge the LED collar.

Powering on/off

• Press and hold the button for 2 seconds to tum the collar on or off.

Putting on

• Slide the LED collar/• out of the buckle from bottom to top to unlock it.
•  The buckle will click< Into place.

Light Modes

Explore the 7 light modes of your LED collar. You can cycle between the modes by pressing the button.

Glowing green

Glowing red

Glowing fluorescent

Breathing green

Breathing red

Breathing fluorescent

Flashing colors

Cleaning and Maintenance

• If the LED collar ls stained, wipe it with a damp cloth. Do not immerse the collar In water for cleaning.

Troubleshooting

Problem	Solutions
Will not charge	Check that the households electrics are on-test by plugging in another appliance. Check that the outlet is working-test The LED collar in a different USB port. Check the USB cable for signs of damage. If damaged, stop using and replace the cable. If the battery voltage is too low, it may take some time after connection before the collar begins to flash in red.
Lighting time Is too short	Make sure that the LED collar Is fully charged before each use. Check if the button was accidentally pressed, resulting in the collar being turned off.
Will not light up	Check if the collar has been turned on. Press and hold the button for 2 seconds and check if the collar lights up. Check if the collar has power. Connect the collar to the USB cable to check

Product Specifications

	18″	26″
Product Name	DogCare LED Dog Collar
Model	LC01
Dimensions	18″ X 1″ X 0.6″	26″ X 1″ X 0.6″
Weight	1.4 oz	1.7 oz
Collar Maximum Length	18 “	26 “
Battery Type	Built-in rechargeable lithium-ion battery
Input	DC 5V/1A
Charging Interface	Micro USB
Water Resistance	Waterproof
Operating Ambient Temperature	32 °F to 104 °F

DOWNLOAD PDF

Dog Care LC01 LED Dog Collar With 7 Light Modes User Manual

REFERENCE LINK