Table of contents
show
DT No.1 DT58 Pro Temperature Fitness Tracker User Manual
Get Started
Thank you for choosing our product. You can read this manual and have a thorough understanding of the use and operation of the equipment. The company reserves the rights to make changes to the contents of this manual without prior notice.
Product includes:
- Package 1
- manuaI 1
- Smart band 1
Description of bracelet function
Description of touch key
- A: Press and hold for 3 seconds to boot.
- B: Click: select function downwards. Press and hold: confirm. 1.2 Charging instructions:
Please pay attention to the charging direction.
*Please be aware that the two contacts of charging cannot contact the conductor at the same time, or it may cause the burning of circuit.
Watch strap disassembly and assembly instructions:
Standby dlal plate Interface:
Temperature
After wearing the bracelet for the first time hold your wrist for 5 minutes, the skin temperature and body temperature can be detected. If the bracelet exceeds 37 .3 °, the bracelet will vibrate to remind the high temperab.Jre.
Step count
The step count is enabled by default. This interface displays the current number of steps, kilometers, calories and heart rate. The data are cleared every day at 12 am. 1.4 Health
- Heart rate, correctly wears the bracelet (left hand/right hand) on the wrist, enter the heart rate menu, and continuously measure the heart rate value. After the bracelet is bound to the app, the heart rate data Is synchronized to the app In real time.
- Blood pressure, correctly wears the bracelet (left hand/right hand) on the wrist, enter the blood pressure menu, measure the single blood pressure value. After the bracelet is bound to the app, the blood pressure data is synchronized to the app in real time.
- Sleep, sleep monitoring period: 21 :00 to 9:00 the next day, After the bracelet generates data end exits sleep monitoring, the bracelet sleep data can be synchronized to the APP after the bracelet Is bound to APP.
Heart rate varlaUon
- Make sure you are property wear the bracelet on the wrist during ECG test After the function is on, touch the screen position with finger to start measurement. The test ends at 30s. If it is less then 30s, it prompts to reb.Jm to the fingertip page.
- Breath guide
Enter the breath Interface. After 2 minutes, the breath guide begins. After breath adjustment, follow the light spot to adjust breath. - Push message
Open the push message interface, bind the bracelet to the app. When notification pennission is enabled, the new message received in the notification bar of the mobile phone will be pushed to the bracelet. A total of 5 messages can be saved, and the message received after 5 wlll overwrite previously received messages - Sports mode {walking, running, cycling, hiking, swimming, football, basketball, indoor running)
- Select the corresponding sports mode, press and hold the touch key on the screen to start the corresponding sports mode; long press the screen to jump to the end sports interface, click· – • to return to the sports interface to continue the sports, click· •· to end the sports and save the data, click• -• to end the sports and not save the data;
Outdoor data
- Weather
The mobile phone Is connected to the network. After the app has acquired the weather infonnation, bind the bracelet to the app. The weather infonnation in the app is pushed to the bracelet. - Air pressure
The mobile phone is connected to the network. After the app has acquired the air pressure infonnation, bind the bracelet to the app. The air pressure infonnation in the app is pushed to the bracelet. - Elevation
The mobile phone is connected to the network. After the app has acquired the elevation infonnation, bind the bracelet to the app. The elevation information in the app is pushed to the bracelet. - UV
The mobile phone is connected to the network. After the app has acquired the UV lnfonnatlon, bind the bracelet to the app. The UV lnfonnatlon In the app Is pushed to the bracelet.
Common Tools
- Vibration
Press and hold the touch key to switch on/off. (Enabling the vibration will affect the usage time) - Brightness adjustment
Press and hold the touch key to adjust among the three levels of low, medium and high. - Restore factory setting
Long press to select whether to restore the factory settings, all data in the bracelet will be cleared after recovery. - View version infonnation
View the Bluetooth name and Bluetooth address and version number of the bracelet. - Shutdown
Long press to tum off the bracelet.
Bind app
- APP download method
- Scan QR code to download:
- App store Google play
- Search and download in application market
Android:
Search HPlusFlt to download In 360 application, Google play and other appllc:atlon market 10S: Search HPlusFit to download in App Store
Bind Bluetooth
- Unconnected status:
After the bracelet is turned on, the Bluetooth stays in the search state. After opening the APK/APP, enter the device-binding device and select the corresponding bracelet device name to bind the bracelet to the app. - App binding status:.
Bracelet time synchronization: After the bracelet is bound to the app, click to realize synchronization of the time and time system of the bracelet and the mobile phone. - Data synchronization
After the bracelet is bound to the app, the health data of the bracelet can be synchronized to the app end; after opening heart rate, sleep, and motion Interface, click to select the date. - Messaga push
After the bracelet is bound to the app, the corresponding notification pennission in the mobile phone system is enabled. Enter more- notification applications in the app to enable the corresponding third-party application. - Call notlflcaHon:
In the personal application, enable the call notification. When the mobile tenninal receives one or more incoming calls, the bracelet will receive one/multiple incoming call notifications at the same time; - SMS notification:
Enable the SMS notification in the personal application. When the mobile phone receives one/multiple SMS messages, the bracelet will receive one/multiple SMS notifications at the same time; - Other application message notfflcations:
Enable the corresponding application message notification, such as WeChat, QQ, Facebook, Twitter, etc. in the personal application. When the mobile phone receives one/multiple application message notifications, the bracelet will receive one/multiple corresponding message notifications at the same time. - Sedentary reminder
Set the start time, end time and sedentary time interval (minutes), threshold (steps), click to enter the Repeat to select the sedentary reminder date (week). When the sedentary time is up, the bracelet vibrates, showing sedentary icon. - Alarm reminder
Click the alann reminder setting to add the alann time. When the alann time Is up, the bracelet will prompt: the alann icon. - Heart rate detection
Set the start time, end time and sedentary time interval (minutes), check the heart rate test and save. - Flnnware upgrade
Detect whether the firmware version of the bracelet is the latest version. It will prompt if there is a new version and update to the latest version. - Unbind
Bind the bracelet to app; click unbinding with bracelet on the device interface to unbind the device. Please Ignore the paired device In the phone settings of IPhone.
REFRENCE LINK
