Forever SB-50 Fitness Tracker Smartband User Guide
Introduction
Thank you for buying the Forever brand product. Before use, read this instruction manual and keep it for future reference. Do not open the device on your own – any repairs should be carried out by a serviceman. Only use original parts and accessories supplied by the manufacturer. The device should not be exposed to direct sunlight, fire or other heat sources. We hope that Forever product will meet your expectations.
Product Description
- Touch button
- Heart rate sensor
Charging the battery
- Remove the device from the band.
- Then slide the device (the side with the two gold connectors) into the included charging bracket with cable.
- Connect the USB connector to a power source.
- If the device was discharged, it will turn on automatically.
Connect the Smartwatch & Disconnect
Connecting the smartwatch with your phone
Activate Bluetooth in your phone. Launch the “Forever Smart” app on your smartphone, then enter your details –
such as name, gender, date of birth, weight, height – in the user profile and click “Save”. Select the smartwatch
model you want to connect to. Refresh the list of Bluetooth devices by dragging the screen down, then select
the Bluetooth name of your device and wait for the connection to be established.
Disconnecting the device from your smartphone
Open the “Forever Smart” app on your smartphone. Press “Disconnect Smartwatch” in the “Settings” menu, then confirm with “OK” For iOS, to disconnect the smartwatch from your phone, click “Disconnect Device” in the “Settings” menu of the “Forever Smart” app, then go to your smartphone’s Bluetooth settings and select “Forget this device”.
Operating the device
- Turning on: Press and hold the function button for 3 seconds.
- Illuminating the screen: press the function button or move your wrist.
- Viewing the functions: Press the function button and the screen will display the subsequent functions.
- Confirmation: hold down the function button to confirm the function selection
Installation
Installing the “Forever Smart” application on your smartphone:
Find the “Forever Smart” application in Google Play or App Store. Or scan the QR code below. Then install the app on your phone.
FUNCTIONS
- Watch dial interface:
To change to a different watch dial, illuminate the screen and hold down the function button. The dial will change – repeat the step until you obtain the desired watch dial. - Activity measurement:
The device automatically gathers your daily activity data. Press the function button to move between screens showing the number of steps, distance traveled and calories burnt.Once the data is synced to your phone, you can check your activity history in the app. - Heart rate:
To start measuring your heart rate, press the function button and go to the heart rate measurement screen. Hold down the button and the device will start measuring and display the result. Once the data is synced to your phone, you can check your activity history in the app. - Sleep monitoring:
Put the device on your wrist overnight, in the morning it will show you the total number of hours you have slept. If your device is connected to a smartphone, you can check detailed sleep data in the app. - Sport modes:
Go to the “Sport” screen, then hold down the multi-function button to view the sport modes. The device has four modes. Walking, Running, Hiking, Cycling. You can select the mode of interest by holding down the function button and start your workout. The device will start recording data. Once your workout is complete, hold down the function button to finish the data measurement and save the result. Press the function button to see the collected data. - Weather:
If the smartwatch is connected to the “Forever Smart” application via Bluetooth, it will display the weather forecast.It is recommended to set the location manually, but you can also let the “Forever Smart” app do it automatically. - Notifications / messages:
Go to the “Messages” screen. Hold down the function button to read messages or check notifications. - Power off:
To turn off the device, go to the “Power off” screen and hold down the function button. - About:
Once you reach the “About” screen and hold down the function button, the following information will be displayed: Name, BT Address and Software Version of the device. - Find Phone:
If the smartwatch is connected to the “Forever Smart” app, hold down the function button on the “Find Phone”
screen. Your phone will ring so you can find it. - Reset:
When you go to the “Reset” screen and hold down the function button, the device will restart and all settings will be restored to factory defaults. - Inactivity reminder:
Enable the activity reminder function in the “Forever Smart” app on your phone (you can find it in “Advanced
Settings”). You can choose the time interval and frequency of reminders. - Hydration reminder:
Enable the hydration reminder function in the “Forever Smart” app on your phone (you can find it in “Advanced Settings”). You can choose the time interval and frequency of reminders. When the time comes, the device will display a reminder on the screen and vibrate. - Reminders:
You can set reminders in the “Forever Smart” app. When adding a new reminder, select its type, frequency (day
of the week) and time. - Activate the display with a wrist movement:
Using the “Forever Smart” application in the advanced settings, you can enable/disable the function of activating the display with a wrist movement. This function allows you to wake up the display by raising your hand.
BATTERIES
Avoid exposing the battery to very low or very high temperatures (0ºC – 45ºC / 32ºF – 113ºF). Extreme
temperatures can affect the capacity and life of the battery. Avoid exposing the battery to liquids and metal objects, as this may result in complete or partial damage to the battery. Use the battery only for its intended purpose. Do not destroy, damage or throw the battery into a fire – this can be dangerous and cause a fire. Place a used or damaged battery in a special container. Overcharging or over-discharging the battery can cause its damage. Therefore, do not charge the battery longer than necessary to fully charge it, or leave a completely discharged device for a long time without charging. The battery in the device is not user-replaceable.
Specification
- Display: 0.96” 160 x 80 px
- Standby time: up to 10 days
- Water proofness: IP65
- Battery: 90 mAh
- Weight: 23 g
- Band length: 245 mm
- Bluetooth: 5.0
- Compatibility: iOS ≥ 10.0; Android ≥ 5.0
