ILIFE A4s Pro Vacuum Cleaner
Positioning the charging dock.
Please the charging dock against a wall and connect the adapter to an outlet. It is suggested to leave an area with at least 4 feet (1 meter) on each side of the charging dock, and at least 8 feet (2 meters) in front of the charging dock. Do not place the charging dock around doors and stairs.
For optimizing performance of your robot, try best to place the charging dock in an
open and uncluttered area.
Wake up and charge your robot
Turn on the power switch at the side of body, then place your robot on the charging dock for a full charge. When charging is finished, alights will turn off. 
Always keep the power switch turned on during your daily use. Turn off the power switch only when you don’t use your robot for more than one week.
A4s is read to clean
- To start
A. Make sure the power switch is on. B. Press [wo button on robot or a button on remote control to start cleaning. * If robot is in sleep mode, press (a] button to recover it from sleep mode. Press [ button again to start the cleaning cyde. - Pause
Press (a) button on robot or a button on remote control to change from Clean mode to selected mode.
* When robot is paused, press – button to resume the cleaning cycle. - Sleep
Change from selected mode to sleep mode: A. Press and hold ( button on robot for 3 seconds. B. Robot automatically enters sleep mode if no command is received after 45 seconds.
Scheduling
- Setting local time
- Point the remote control towards the robot.
- (Make sure the power switch is on.)
- Press PLAN and then use directional buttons to set the correct time.
- Press PLAN to save the setting.
Setting a schedule
- When a schedule is confirmed, robot will start cleaning automatically at the same time every day. If the robot is turned off, you will need to schedule again.
- Point the remote control towards the robot.
- Press CLOCK and then use directional buttons to set the scheduled.
- Press CLOCK to save the setting. To cancel the schedule, please set the time to 00:00 or turn off the robot.
Robot Maintenance
- For better cleaning performance, empty dustbin and clean high performance filter after each use (High Performance Filter can’t be washed with water). Replace with a new one when it is needed.
- In homes with heavily shedding pets, dustbin may fill quickly with fur or hair. In these cases, you may need to empty dustbin and clean filters more frequently.
Trouble Shooting
- Error code sheet
The robot will remind you by beeping or erratic movements when it is malfunctioning. Chart tone
- Note: If all above solutions don’t work, please take below actions.
- Re-set the robot by re-turning on the power switch.
- If re-set action doesn’t work, please contact support@iliferobot.com
Contact Us
Email Us
Technical Support
support@iliferobot.com
Tweet Us
@ILIFEROBOTICS
Mon-Fri: 9:00AM – 18:00pm
ILIFE Customer Service
Toll-Free Number:
1-800-631-9676 (Toll free for USA & Canada)
Monday-Friday from 900 AM 35.CO PM CST
