maxell-wireless-true-earbuds-manual

Maxell Jelleez True Wireless user manual

Maxell Jelleez True Wireless User manual

Maxell Jelleez True Wireless Product image

FCC ID: 2AOKX-SS-TW003B

Left and right unit pairing
After powering on, the Left and right units will automatically pair. Once paired successfully, you will hear an indication voice “Connected”, the right LED light will flash red and blue alternately, and the left LED will flash blue slowly. You just need power on the two units and pairing will be automatic.

3) Pairing with the device
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select “JELLEEZ- TW” from the list of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize the pairing.

Calling
Both units support voice calls.
SJ The right and left earbuds can be used independently

The Power Button function
Power on: Hold the Power Button of the right and left unit for 3 seconds to power on. Pairing: Automatic pair of the two units.
Reject incoming call: Hold the Power Button for 2 seconds to reject the incoming call. Play/Pause: Short press any Power Button to pause playing music during music play. End a call: Short press any Power Button to end a call while calling. Redial last number: Double press any Power Button to redial the last number.

Specification:

Battery capacity (600mAh)
Charging Box Cutout Voltage: DC 5+-0.25V 50mA*2
Charging Box Input Voltage: DC 5+-0.25V 1A
Battery Capacity :

Earbud: 50mAh/3.7V Polymer lithium battery.

Charming Box: 600 mAh/3.7V Polymer lithium battery.

Music Time: Monaural Earbud with Full Electricity 2.SH, Consuming All the Electricity of the Charging Box Up to 1OH
StandbyTime: 60h
Call Time: 2. SH
Charging Time : Charging the Earbuds 1.5-2H, Charging the Battery Case 2-2.SH
Bluetooth Version: 5.0V

Charging the charging case:

Maxell Jelleez True Wireless fig1

Maxell Jelleez True Wireless fig2

WARRANTY INFORMATION:

Maxell warrants this product to be free from all defects for a period of 90 days from the date of the original purchase. This Warranty does not apply to normal wear or damage due to accident, abnormal use, misuse, or neglect. This Warranty only applies to personal and individual use of the product and not for commercial, institutional, or any other use.

Any defective item will be replaced, at no charge, upon reasonable confirmation by Maxell of its defective condition, if returned with proof of purchase to an authorized Maxell dealer or directly to Maxell Warranty Replacement, 3 Garret Mountain Plaza, Suite 300, Woodland Park, New Jersey 07424. Neither Maxell nor any authorized Maxell dealer shall be liable for consequential damages arising from this Warranty unless otherwise provided by law.

Connect the USB charging cable to a computer USB port and the Micro USB plug to the charging port of the device. The LED light fishes blue rapidly. It takes around 2 hours to fully charge. When the battery is fully charged, the LED light will stay blue.
The charging case can charge the earbuds when it is charged.

Charging the earbuds

The Red LED light on the earbuds turns on while the earbuds are charging. Put the earbuds into the charging case (please put the “right” unit in the slot with the “R” mark, put the “left” unit in the slot with the “L” mark) for automatic charging. The earbud’s red LED light turns on while the earbuds are charging. It takes around 2 hours to fully charge. When the battery is fully charged, the LED light will turn blue. 1 minute later the LED light will turn off. When both earbuds are fully charged, the charging case will turn off the charging function automatically and turn to standby.

The function instruction

Maxell Jelleez True Wireless fig3

Power on
Hold the Power Button alright and left the unit for 3 seconds to power on, the LED light will flash red and blue alternately.

FCC INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/IV technician for help.
CAUTION

Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

WHAT THIS WARRANTY DOES NOT COVER:
This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.

CUSTOMER SERVICE

Our Customer Service team is available to assist you with product questions, service center locations, and replacement parts. Please have your model number available, as well as the type and style (located on the underside of your product). Please do not return a product to the place of purchase.

Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380 (Please do not send the product to this location)
www.laskoproducts.com

PARTS FOR DISCONTINUED, OBSOLETE, AND CERTAIN OTHER PRODUCTS MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC COMPONENTS AND MOST HEATER COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT.

REFERENCE LINK

https://maxell-usa.com/wp-content/uploads/2020/06/Jelleez-TW-Earbuds-Full-Manual.pdf

Leave a Reply