Philips Norelco 8800 Wet & dry electric shaver User Manual
Charging
- Charging, recharging or storing at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of
- Always unplug this charging stand/Jet Clean System from the electrical outlet immediately after use, except when razor is (re)charging. You can store the razor in the charging stand or Jet Clean System.
- Chargingor recharging requires one full
- A fully charged razor has a shaving time ofup to 60 minutes (models 1290X, 1280X, 1280XCC and 1260X) or 50 minutes (models 1250X and 1250XCC).
Put It To The Test & Shaving Tips
- 21Day Trial and Conversion It is a fact that your skin and beard need time to adjust to a new shaving system.
- Use your new razor exclusively for 3 weeks to fully enjoy the closeness of a Philips Norelco
- At first you may not get as close a shave as you expect, or your face may even become slightly This is normal since your beard and skin will need time to adjust. Invest 3 weeks and you’ll soon experience the full joy of your new razor.
- Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Philips Norelco shaving system.
- If you are still not convinced after 21 days, Philips Norelco will refund you the full purchase price as long as the request is received within 45 days of purchase.
Maintenance
- Always remove razor from the charging stand/ Jet Clean System before cleaning
- Unplug the charging stand/Jet Clean System after charging/recharging or cleaning The charging stand/Jet Clean System and razor may be wiped clean using a damp cloth.
- Water from the tap should be on a warm setting to clean any washable
- Note: DO NOT place or clean any parts of the charging stand/Jet Clean System in a dishwasher
Storage
- The razor can be placed in the charging stand/ Jet Clean System for safe Remove the plug from outlet as soon as the razor is fully charged or cleaned.
- If appliance will not be used for an extended period of time, it is recommended that the cleaning solution in the Jet Clean canister be emptied out before
- Be sure razor is turned Remove cord from outlet and charging stand or Jet Clean System before storing in a safe, dry location where
it will not be crushed, banged, or subject to damage.
- Do not wrap cord around razor/charging stand or Jet Clean System when
- Store cord in a safe location where it will not be cut or
- Do not keep charging stand or Jet Clean System permanently plugged into
- Do not place or store charging stand/Jet Clean System where it can fall or be pulled into a tub or sink, water or other liquid while plugged If storing razor in the charging stand, put the Protective Razor Head Cap on razor to protect heads.
Accessories
- Replacement Shaving Unit
Model RQ12 – For maximum razor performance, replace your Philips Norelco razor heads once a year.
- Shaving Head Cleaning Spray
HQ110 – Philips Norelco Shaving Head Cleaning Spray
- Cleaning Solution
HQ200 – Philips Norelco Jet Clean Solution, 10 fl. oz. /300 ml.
Philips Norelco Razor Accessories may be purchased at a store near you, or on our website www.philips.com/store
Troubleshooting
If you’re experiencing issues with your Philips Norelco 8800 Wet & Dry electric shaver, here are some troubleshooting steps you can try to resolve the problem:
- Clean the Shaver: Sometimes, performance issues can be caused by hair and debris clogging the shaver’s blades. Make sure the shaver is turned off, and then open the shaver head unit. Remove any hair or debris using the included cleaning brush.
- Check the Battery: If your shaver is not turning on or is not holding a charge, it might be a battery issue. Ensure that the shaver is properly charged. If it’s not charging, try a different charging cable or adapter.
- Replace the Blades: If the shaver is not cutting effectively, the blades may be dull or damaged. Check the condition of the blades, and if necessary, replace them according to the manufacturer’s recommendations. Dull blades can result in a less comfortable shaving experience.
- Inspect for Damage: Carefully examine the shaver for any visible damage or loose parts. If you find any, contact Philips Norelco customer support for further assistance.
- Reset the Shaver: In some cases, a simple reset can resolve minor issues. To reset the shaver, remove the shaving head, then press and hold the power button for about 10 seconds. Release the button and reassemble the shaver head. Try turning it on again.
- Lubricate the Blades: Lubricating the blades can improve their performance and prolong their lifespan. Use a small amount of shaver lubricant or mineral oil on the blades as recommended by the manufacturer.
- Check for Blockages: If the shaver is not working properly, there may be blockages inside the shaving head or the hair chamber. Ensure that all parts are clean and free of obstructions.
- Update the Shaver’s Software: Some modern electric shavers can be updated through firmware updates. Check if there are any available updates for your shaver on the Philips Norelco website, and follow the instructions to update the software.
FAQS
1. Can I use the Philips Norelco 8800 shaver in the shower or with shaving cream?
- Yes, the Philips Norelco 8800 is designed to be used both wet and dry. You can use it with shaving cream or gel, and it’s waterproof for use in the shower.
2. How do I clean the shaver after use?
- After each use, you can simply rinse the shaving head and blades under running water to remove hair and shaving cream. Make sure the shaver is turned off and disconnected from the power source before cleaning.
3. How often should I replace the shaving heads?
- The frequency of replacing shaving heads depends on your usage and the coarseness of your facial hair. On average, it’s recommended to replace the shaving heads every 12 to 24 months for optimal performance. Some shavers have a replacement indicator that will alert you when it’s time to replace them.
4. How long does the battery last on a single charge?
- The battery life of the Philips Norelco 8800 can vary depending on usage, but on a full charge, you can typically expect 50 to 60 minutes of cordless shaving time. Charging times may vary, but a full charge usually takes around one hour.
5. Can I use the shaver while it’s charging?
- Some electric shavers, including the Philips Norelco 8800, offer a quick-charge feature that allows you to use the shaver for a quick shave while it’s plugged in. Refer to your user manual for details on this feature.
6. Is it safe to use the shaver on sensitive skin?
- The Philips Norelco 8800 is designed with comfort in mind and features advanced technology to minimize irritation. However, it’s important to use proper shaving techniques and take your time when shaving sensitive areas to avoid irritation.
7. Can I use the shaver for both wet and dry shaving in one session?
- Yes, you can switch between wet and dry shaving during the same session. Just make sure to clean the shaver thoroughly if you switch from using shaving cream to dry shaving.
8. How do I maintain the shaver for long-lasting performance?
- To ensure long-lasting performance, regularly clean the shaving head, replace shaving heads as needed, oil the blades when necessary, and store the shaver in a dry place. Follow the maintenance guidelines provided in your user manual.
9. What is the warranty for the Philips Norelco 8800 shaver?
- Warranty terms can vary by region and retailer, so it’s best to check your product documentation or contact Philips customer support to determine the warranty coverage for your specific shaver.
10. Where can I find replacement parts and accessories for my shaver? – You can typically find replacement shaving heads, cleaning cartridges, and other accessories for your Philips Norelco 8800 at authorized Philips retailers, online marketplaces, or through the Philips official website.