Origin-Storage OSFTAG12L-PALPHA12 Security Filter Guide


Origin-Storage OSFTAG12L-PALPHA12 Security Filter Guide


Origin Anti Glare Display Film


  1. Clean your screen diligently (no dust or grease)
  2. Display protection film
  3. Remove the protective film from the filter.
  4. Arrange the filter and attach the borders of the screen.
  5. If you are not happy with the result, repeat the procedure. No liability is accepted for improper handling!

Origin Security Filter with adhesive stripes


  1. Contents of package
  2. Remove the adhesive strip from the filter carefully
  3. Attach the adhesive strip on the backside of the filter close to the edge
  4. Remove the protective foil from the attached adhesive strip
  5. Attach the filter centrally on the screen.

Maintaining the Adhesion of Your Privacy Filter:

For both the adhesive layer on the filter and the adhesive strip:

  • Regular Dusting: Use a dry, lint-free microfiber cloth to gently remove dust and surface debris. Avoid using rough materials or cleaning solutions, as they may damage the adhesive.
  • Occasional Deep Cleaning: For more thorough cleaning, rinse the adhesive layer and strip it under lukewarm water. Remember: Be gentle, avoid strong water pressure, and do not submerse the filter itself.
  • Gentle Scrubbing: If necessary, lightly rub the adhesive with your fingertips or a soft bristle brush to remove stubborn dirt or debris.
    Important: Don’t scrub too hard, as this could scratch or weaken the adhesive.
  • Thorough Drying: After rinsing, use the provided wipe or another clean, lint-free microfiber cloth to carefully dry the adhesive layer and strip. Ensure there’s no moisture left behind, as this could affect adhesion.

For the adhesive strip only:

  • Replacement Recommendation: Consider replacing the adhesive strip every 6-12 months, depending on usage and cleaning frequency. This will ensure optimal adhesion and prevent the filter from falling off.

By following these simple tips, you can keep the adhesive layer on your privacy filter and the adhesive strip clean and functional for optimal performance and lasting protection.

Always handle the filter and adhesive strip with care. Avoid touching the adhesive surfaces with your fingers or exposing them to harsh chemicals or cleaning solutions



Leave a Reply