Origin-Storage OSFNBAG14L-P1030 Anti Glare Display Film Guide


Origin-Storage OSFNBAG14L-P1030 Anti Glare Display Film Guide


Origin Anti Glare Display Film


  1. Clean your screen diligently (no dust or grease)
  2. Display protection film
  3. Remove the protective film from the filter.
  4. Arrange the filter and attach the borders of the screen.
  5. If you are not happy with the result, repeat the procedure. No liability is accepted for improper handling!

Origin Security Filter with adhesive stripes


Package Contents:

  1. Display Filter: The anti-glare film to be applied to your screen.
  2. Adhesive Strip: A self-adhesive strip for secure attachment of the filter.

Installation Instructions:

  1. Adhesive Strip Preparation: Carefully detach the adhesive strip from its backing paper. Avoid touching the adhesive surface with your fingers.
  2. Filter Attachment: Place the adhesive strip on the backside of the filter, ensuring it is positioned close to the edge for optimal grip. Press firmly along the entire length of the strip to secure it onto the filter.
  3. Protective Foil Removal: Carefully peel off the protective foil covering the adhesive surface of the strip. Handle the filter with care to avoid leaving fingerprints on the exposed adhesive.
  4. Screen Mount: Position the filter centrally on your screen, aligning it precisely with the edges. Carefully press the filter onto the screen, starting from one corner and progressively smoothing outwards to eliminate any air bubbles.

Cleaning of the adhesive layer of the privacy filter:
Cleaning of the adhesive strip: rinse under water and rub gently to remove dirt. Use the wipe provided to dry.

No liability is accented for improver handling!



Leave a Reply