Table of contents
show
Pyle Audio Mini Stereo Power Amplifier User Manual
IMPORTANT SAFETY INSTRUCTIONS
- Read Instructions – All the safety and operating instructions should be read before operating the appliance.
- Retain Instructions – The safety and operating instructions should be retained for future reference.
- Head Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow Instructions
- Water and Moistunt – The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool, or a wet basement.
- Ventilation – The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings or placed in a built-in installation, such as a bookcase or cabinet that may impede the tow of air through the ventilation openings.
- Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances including amplifiers that produce heat.
- Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
- Grounding or Polarization – Precaution should be taken to insure that the grounding or polarization means of an appliance are not defeated.
- Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the appliance.
- Cleaning – The appliance should be cleaned only as recommended by the manufacturer.
Your new PTAU23 Mini Stereo Power Amplifier
gives you the power and versatility you need in a professional sound system. Its wide frequency response makes it suitable for amplifying music or vocal program material. The front-located USB 2.0 interface allows you to connect the input of your MP3 devices conveniently, and the MIC PAGER/MIXING function offers the flexibility of using it at paging or musical events. It can be used for meeting halls, houses, restaurant, schools, stores, live bands, or offices.
FEATURES AND CONTROLS
- 1. Power ON/OFF: Main power switch
- Power ON/OFF LED Indicator: The indicator lights up when the amplifier is turned ON.
- USB 2.0 Input Interface with LED Indicator: Press to play the last song backward, press to play the next song forward, and press to play and/or pause the song. When the song is ceased playing, it will be memorized to resume once the amplifier is reactivated and/or the USB input is selected again.
- 1/8″ AUX/CD IN: Connect the MP3 Device (player) sources such as PC (CD ROM), laptop, walkman, iPod, and mobile phones
- . 1/4″ PHONE Jack Accepts headphones with a 1/4″ plug.
- MIC Volume Control: This lets you adjust the volume of the connected MIC to the proper setting
- MASTER Volume Control: This lets you control the overall volume level. It doesn’t affect the volume of MIC.
- BALANCE Control: This lets you adjust the sound balance between the left and right of the amplifier outputs
- BASS and TREBLE Control: Allows you to boost or attenuate bass and treble for the desired sound
- AUX 1/AUX 2/CD/USB Input Selector: This lets you select the desired input music source. When it is switched to AUX1, AUX2, or CD input while the USB is still playing, the playing signal of the USB continues, just it is not sent to the amplifier’s output
FEATURES AND CONTROLS
- . LED Display: Displays the output level and selected input
- SD Card Input
- USB Flash Drive Input
- Wireless BT Antenna: Wireless BT Streaming receiver
- . FM ANTENNA CONNECTOR: Connect for AM and FM antennas
- . AUX 1/AUX 2/CD RCA Inputs: This lets you connect most high-level audio sources such as CD player, tape deck, tuner, camcorder, or VCR
- REC RCA Output: This lets you connect the amplifier to a tape deck for recording
- Push Type Speaker Terminal: This lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel in stereo mode.
CONNECTION DIAGRAM
WIRELESS BT STREAMING OPERATION INSTRUCTION
External devices which have a built-in BT feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers. If your amp is connected to speakers, you will hear audible tones which will help for connecting.
- First, be sure that the amplifier is powered ON, and turn the volume to low. Pull out the BT Antenna at the back panel for a better-receiving signal. Press the MODE button on the front panel then the BT Indicator light will be lit. (The unit is automatically ready to pair with your device)
- Turn ON the Wireless BT function of your external device.
- Search for available devices within range of your external Wireless BT device.
- Wait for a while then and the “PYLEUSA” on the paired devices list on your external device and select “PYLEUSA”, or nd the “BT” on the paired devices list on your external device and select “BT”
- . Your amplifier will beep and the lights will ash once when pairing is successful.
- You can now play music and other audio on your external device through your amplifier
- The amplifier will beep and the lights will ash once again when the external device is turned off or unpaired.
Wireless BT Connectivity:
- Built-in Wireless BT Audio Receiver
- Simple Pairing for Wireless Music Streaming
- Works with All of Today’s Latest Wireless BT Devices (Smartphones, Tablets, Laptops, Computers, etc.)
- Wireless BT Version: 5.0
- Wireless BT Network Name: ‘PYLEUSA’
- Wireless Range: Up to 40’+ ft.
Features:
- RCA REC Output
- 1/4″ Phone Jack
- 1/4″ MIC Input Jack
- USB Flash & SD Memory Card Readers
- Digital LED Display for Playing information
- Built-in Wireless BT for Audio Streaming
- MP3 Digital Audio File Playback Compatible
- AUX1, AUX2, CD & RCA Inputs
- Four Push Type Speaker L/R Terminals
- Switchable MIC Pager and Mixing Mode
- Switchable AUX1, AUX2, CD, USB Inputs
- Bass, Treble, Balance, Master & Mic Volume Controls
Technical Specs:
- Power Output: 2 x 40 Watt Peak
- RMS Power Output: 8 Watt x 2 @ 8Ohm
- Power Supply: 120V /240V
- Construction Material: Iron
- Remote Control Battery: (1) x CR-2025 (included)
- Impedance: 4-8Ohm
- Frequency Response:20Hz-20KHz
- Dimensions (L x W x H): 5.39” x 7.48” x 2.72” -inches
REFERENCE LINK
https://www.pyleaudio.com/sku/ptau23
