PYLE PTA1000 Wireless BT Streaming user manual
SAFETY INSTRUCTIONS
- Intended to alert the user to the presence of uninsulated
- “Dangerous Voltage” within the product’s enclosure may be strong enough to create a risk of electric shock to a person.
- Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN THE AMPLIFIER OR REMOVE THE COVER. There are no user-serviceable parts inside. Please use a qualified technician for all servicing.
WARNING: To prevent electrical shock or fire hazards, this amplifier should not be exposed to rain or moisture. Do not place objects filled with liquid, such as vases, on the amplifier.
When using electrical products, caution should always be used.
Please read and keep these safety instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install the amplifier in accordance with all manufacturer’s instructions.
- Do not install near any heat source, such as a radiator, heat register, stove, or other apparatus (including amplifiers).
- Do not alter a polarized plug (two blades with one wider than the other) or grounding-type plug (two blades with a third prong), as they provide protection. If the provided plug does not fit into your outlet consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being damaged, particularly near the plugs, convenience receptacles, and the point where they connect to the amplifier.
permissible noise level exposures
The US Government’s Occupational and Health Administration (OSHA) has specified the following permissible noise level exposures:
SOUND LEVEL dBA, SLOW RESPONSE DURATION PER DAY IN HOURS
- 8: 90
- 6: 92
- 4: 95
- 3: 97
- 2: 100
- 1 1/2: 102
- 1: 105
- 1/2: 110
- 1/4 or less: 115
OPERATION
- INPUT GAIN (dB)
These controls are used to adjust the input gain of each channel. They determine how loud each channel of the power amplifier will sound for a given input signal level. - LED (POWER)
These indicators illuminate when the AC main power is being supplied to the amp and both channels are operational. - SIGNAL ACTIVITY LEDS (SIGNAL)
These indicators illuminate when the associated channel output signal level exceeds 1 Volt RMS. - OVERLOAD LEDS (CLIP)
These indicators illuminate when the associated channel has been overloaded. - FAULT LEDS (FAULT)
These indicators illuminate when the amplifier has just been turned ON or if the amplifier has detected a problem, such as overheating or circuit problems. - POWER SWITCH
This heavy-duty, rocker-type switch turns on the power to the amplifier.
- LEVEL INDICATOR
Channel A and Channel B level LED indicator. - BT/AUX IN BUTTON SWITCH
Bluetooth model by push inside. AUX mode by pushing outside - INPUT
Cannon and input jack connectors provide balanced or unbalanced input modes. - MODE SWITCH
This switch is used to select STEREO or BRIDGE mode operation. - GROUND LIFT SWITCH
- BINDING POST OUTPUTS
Shockproof binding posts are provided. - SPEAKER OUTPUT
The amplifier provides (3) four conductor speaker connectors, one for each channel and one for bridge mode. - Switch POWER
Switch to choose 110V-120V or 220V-240V power supply. - INPUT POWER
This is a standard IEC power connector. - FAN GRILL
(Two) 2 speed DC fans supply cool air to the amplifier. - Wireless BT ANTENNA
Wireless BT receiver antenna for better signal.
Instruction
Pyle’s PTA1000 Wireless BT Pro Audio Power Amplifier is the perfect solution for all of your audio needs. Using the latest sound amplification technology and an impressive 1000 Wall power output, this receiver is designed to deliver pure stereo sounds from a wide range of connected music sources. Built-in Wireless BT audio receiver ability allows you to stream your music wirelessly and it works with all of your favorite devices (like Smartphones, Tablets, laptops, Computers, etc.) Enjoy full-range stereo sound reproduction when streaming audio with a wireless range of up to 30′ feet.
Additional system features include USB Flash Drive Reader, SD Card Reader, Push Type Speaker Terminal connectors, RCA Stereo Inputs, RCA Subwoofer Output, and along with an Aux (3.5mm) jack to connect even more external devices. Take control of your sound with the Pyle PTA1000 Wireless BT Pro Audio Power Amplifier.
Wireless BT Operation Instruction
External devices which have a built-in Wireless BT feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers.
- First, be sure that the amplifier is powered ON, and turn the volume to the MINI position it’s better to pull the Wireless BT Antenna on at the back panel for better receiving.
- Press the BT/line button switch on the front panel, and you will hear the voice “POWER ON” and also “PAIRING”, and then the unit is automatically ready to pair with your external device.
- Turn ON the Wireless BT of your external devices like Smartphones, computers, and others, etc.
- Search for available Wireless BT devices within range of your external device and wait for your device to select “PYLE PRO” on the pairing devices lists.
- And seconds later when you heard the voice “Your Device is Connected”, then the Wireless BT pairing is successful.
- You can now play music on your external device through the amplifier.
Help & Troubleshooting
If you experience any of the following difficulties while using the unit, use this troubleshooting guide to help you remedy the problem, should any problem persist, consult your nearest dealer.
| Problem | Possible Cause& Solution |
| No Power | “Ensure the power cord is securely connected. *Plug a different device into the electrical outlet to verify that the outlet is working correctly |
|
No Sound | *The wrong input was selected on the amplifier *Music master volume control is set to minimum • Fuse defective *Speakers and speaker cables are either not connected, loose or malfunctioning. |
|
Severe Hum or Noise | *Ensure all cables and wires are securely connected *Connect a different source device to see if the buzzing persists. If does not, the problem may be with the original device. • Connect your device to a different input to the amplifier • The volume is set too high and the loudspeakers distort |
PTA1000
Wireless BT Streaming Pro Audio Power Amplifier
2-Channel Professional Rack Mount Bridgeable Sound Amplifier (1000 Watt)
Features
- 2-Channel Pro Audio Amplifier
- Bridge-able Amp: Bridge Mode Ability
- Built-in Wireless BT Streaming
- (2) 1/4” TRS Input Connector Jacks
- (2) XLR Input Connector Jacks
- (3) Speakon Output Connectors (A/B/Bridged)
- (2) Pair Speaker Terminal / Binding Post Connectors
- Power, Protect, Clip, Signal LED Indicators
- Left and Right Channel Level Signal Indicators
- Built-in Ventilation Cooling Fans
- Front Panel Control Center
- Rack-Mountable System
Wireless BT Connectivity
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Wireless BT Devices (iPhone, Android, Smartphone, iPad Tablet PC, etc.)
- Wireless BT Network Name: ‘PYLE PRO’
- Wireless BT Version: 5.0
- Wireless Range: Up to 30’+ ft.
What’s in the Box
- Pro Audio Amplifier
- Power Cable
- BT Antenna
Technical Specs
- Power Output: 1000 Watt MAX
- Amplifier Type: 2-Channel
- 2 x 500 Watt @ 4 Ohm
- 2 x 250 Watt @ 8 Ohm
- Distortion: <1.0%
- Input Level: +4dB
- Signal/Noise Ratio: 102dB
- Frequency Response: 20Hz – 20kHz, +/-0.2dB
- Power Supply: 120/220V, Switchable
- Dimensions (L x W x H): 19.09” x 9.84” x 3.54” -inches
warning
This product can expose you to a chemical or group of chemicals, which may include ”Lead (Pb)” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
The voice announcing “connected” comes on at random intervals. Is there any way to disable this??
Firmware/Software Glitch: It’s possible that there’s a firmware or software bug causing the device to play the “connected” voice announcement at random intervals.
Incorrect Settings: Check the device’s settings thoroughly, as there might be an option related to voice announcements or notification sounds that is inadvertently enabled
Bluetooth Device Instability: The issue might be related to the Bluetooth device (e.g., smartphone, computer) that is connecting to the PYLE PTA1000.
Please check this otherwise you can direct reach to support of pyle at thier official website