Serenelife SLHC63S Baby Feeding Chair Manual FEATURED img

Serenelife SLHC63S Baby Feeding Chair Manual

SERENELIFE LOGO

Serenelife SLHC63S Baby Feeding Chair Manual

Serenelife SLHC63S Baby Feeding Chair Manual product img

WARNING

  • Fall Hazard: to prevent the high chair from accidentally falling during use, make sure that the support base of the highchair has been completely locked. Please refer to the first clause of the instruction.
  • The product must be assembled and adjusted by an adult. Do not use the product if it is not properly assembled, if it is broken or if pieces are missing.
  • Prevent the child from falling or slipping; always use the five-point safety harness. Use the safety harness both when the seat is reclined and when it is in the vertical position.
  • Never leave the child unattended.
  • Stay near and watch child during use.
  • Do not place your fingers in the mechanisms and make sure the child’s limbs are safe from harm when adjusting the chair.
  • Do not use accessories or replacement parts other than those approved by the manufacturer.
  • Assembly, preparation, cleaning and maintenance of the product must only be carried out by adults.
  • Do not leave the high chair exposed to sunlight for long periods of time. Wait until it has cooled down before sitting the child in the chair.
  • Make sure that any harness is correctly fitted.
  • Always use the restraint system.
  • Position the product so that the child is far from dangers such as electrical wiring, heat sources and flames.
RECLINER
  • When used as a recliner, this product is designed for children from birth up to a weight of 9 kg.
  • Do not use the reclined cradle once your child can sit unaided.
  • This product is not intended for prolonged periods of sleeping. This product does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
  • Danger of strangulation: never leave the child in the recliner if the safety harness is loose or undone.
  • The child should be secured in the high chair at all times by the restraining system,either in the reclining or upright position. The tray is not designed to hold the child in the chair. It is recommended that the high chair be used only by children capable of sitting upright unassisted.
  • Fall Hazard: Children have suffered severe head injuries including skull fractures when falling from high chairs.Falls can happen suddenly if child is not restrained properly. Always use restraints, and adjust to fit snugly.

SWING

  • When used as a swing, the product is designed for children from birth up to 6 months of age and max 9 kg.
  • Remove the tray before use,and fix the protective front bar, and use the safety harness. Refer to Figure 5 for specific instructions.
  • To use the product as a swing, make sure that the seat is always in the lowest position and adjust the backrest according to your baby’s sitting position.
  • Keep a close eye on other children near the product.
  • Keep swing seat fully reclined until child is at least 4 months old and can hold up head without help. Do not adjust the backrest too upright,and watch child during use.

INSTRUCTIONS FOR USE

  1. OPENING: Before opening the high chair, fit the wheels by pushing them in the direction of the arrow (fig. a). Lower the two support base sections one after the other to open the high chair (fig. b) and check the green rectangle to ensure it is open properly.
  2. FIVE POINT SAFETY HARNESS: To fasten the harness, insert the two waist strap buckles (with shoulder straps attached) into the leg divider strap until you hear a click (fig. a). To release it, press the sides of the buckle and simulta neously pull the waist strap outwards (fig. b). To tighten the waist strap, pull from both sides in the direction of the arrow (fig. c). To loosen it, do the opposite.
  3. The shoulder straps of the harness can be set at two different heights. Partially remove the sack (fig. a), release the shoulder straps from the backrest (fig. b1) and pull them out from the sack (fig. b2). Insert the ends of the shoulder straps in the other slots in the sack and the backrest (fig. c), then put the sack back into the right position on the backrest.
  4. BRAKE: The brake on the seat is always applied. To move the seat, keep both buttons held down.
  5. RECLINER-SWING: Before placing the high chair in the recliner-swing mode, remove the tray (fig. a) and the white cylindrical plastic parts from the leg divider. Then insert the protect front bar into the leg divider (fig. b). Finally, use a screwdriver to tighten the screws to secure the front bar.
  6. HIGH CHAIR

  7. FOOTREST: Lower the footrest (fig. a), press the two side buttons at the same time (fig. b) and select one of the three available heights.
  8. TRAY: To fit the tray, pull the central lever underneath it towards you while at the same time pushing it all the way into the armrests (fig. a). To extend or remove the tray, pull the central lever underneath it towards you (fig. b) and move it outwards (fig. c). According to the baby body to adjust the 2-position trays. The high chair has a double tray. The top tray can be easily washed in a dishwasher (fig. d).
  9. USE WITHOUT THE TRAY: To use the seat at the table, remove the tray.
  10. ADJUSTING THE HEIGHT: The seat can be set at 7 different heights. To lower the seat, pull the two levers downwards (fig. a) and move it to the required position. Holding the handle behind the backrest (fig. b) can also be used to raise the seat.
    RECLINING BACKREST: The seat can be reclined in 5 positions: for eating, playing, relaxing or sleeping. To adjust it, raise the handle behind the backrest (fig. c) and lock it in the required position.

BABY HIGH CHAIR PARTS

Serenelife SLHC63S Baby Feeding Chair Manual fig 1

Serenelife SLHC63S Baby Feeding Chair Manual fig 2

Serenelife SLHC63S Baby Feeding Chair Manual fig 3Serenelife SLHC63S Baby Feeding Chair Manual fig 4

Serenelife SLHC63S Baby Feeding Chair Manual fig 5

Serenelife SLHC63S Baby Feeding Chair Manual fig 6

ANTI-SLIDE SYSTEM

Parts

Serenelife SLHC63S Baby Feeding Chair Manual fig 7

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE:
Protect from the weather: water, rain, or snow; prolonged and continuous exposure to bright sunlight may give rise to colour changes of various different materials; store this product in a dry place. The maintenance have to be regularly.

CLEANING THE CHASSIS:
Periodically clean all plastic parts with a damp cloth. Do not use solvent or similar cleaning products; keep all metal parts dry to prevent rusting; keep moving parts clean (adjustment mechanisms, locking mechanisms, wheels, …) and free of dust and sand and if necessary, lubricate with light machine oil all metallic moving parts. Check all nuts and bolts for tightness and tighten when required. check all coverings for bolts and sharp edges and replace when required. Check slightly swing seat and attachments for evidence of deterioration. Replace when required in accordance with the manufacturer’s instructions.

CLEANING THE SACK

  • Wash with a damp cloth and neutral detergent.
  • Do not wring.
  • Do not use chlorine bleach.
  • Do not iron.
  • Do not dry clean.
  • Do not use solvents for stain removal.
  • Do not spin dry

Features:

  • Home Living Baby High Chair
  • Toddler & Child Booster Seat Style Feeding Chair
  • Used for Mealtime Food Serving & Playtime Activities
  • Safe, Sturdy & Comfortable Baby Seat
  • Unique Baby Swing Chair Function for Relaxing Comfort
  • Hassle-Free, Quick Adjustment Setting
  • Reclining with Back & Foot Support
  • Seat Height Level Adjustment
  • Multi-Level Back-Rest Position Adjustment
  • Multi-Level Foot-Rest Position Adjustment
  • Soft, Non-Irritating Cushion Material
  • Built-in Five-Point Locking Child Safety Belt
  • Removable, Hand Wash Only Baby Seat Cushion
  • Smooth Rolling Wheels for Easy Maneuverability
  • Integrated Foot-Brake Activated Wheel Lock
  • Environmentally Friendly Construction
  • Stain-Resistant and Easy-to-Clean
  • Food Grade Safe Serving Tray
  • Snack Time & Food Chair Used for Baby, Toddler, Small Children
  • Some Assembly Required

What’s in the Box:

  • Baby High-Chair
  • Seat Cushion
  • Integrated Child Safety Belt
  • Detachable Food Tray

Technical Specs:

  • Suitable for Ages: 0 – 5 Years
  • Seat Height Level Adjustment: (7) Positions
  • Seat Height Level Height (from Floor): 19.6’’ – 28.3’’ -inches
  • Seat Back-Rest Level Adjustment: (5) Positions
  • Seat Foot-Rest Level Adjustment: (3) Positions
  • Construction Material: Engineered ABS, Synthetic Leather Cushion, Reinforced Aluminum Metal Frame
  • Total Assembled Baby Chair Size (L x W x H): 25.6’’ x 31.5’’ x 37.8’’ -inches

Questions? Issues?

  • We are here to help!
  • Phone: (1) 718-535-1800
  • Email: support@pyleusa.com

This product can expose you to a chemical or group of checmicals, which may include “Cadmium” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to

REFERENCE LINK

DOWNLOAD LINK

Serenelife SLHC63S Baby Feeding Chair Manual

Leave a Reply