MONSTER XKT09 Bluetooth Wireless Headphones Manual
Product parameters
- Transmission distance: 10m
- Driver diameter: ф13тт
- Driver impedance: 320+15%
- Sensitivity: 115 +1.5dB
- Frequency response range: 20Hz-20kHz
- Battery capacity (charging case): 3.7V 300mAh
- Battery capacity (Headphone): 3.7V 30mAh
- Charging time (charging case): ~1.5 hours
- Music playtime (headphone): ~5 hours
- Music playtime with charging case: ~ 24 hours
Packing list
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with a Type-C charging cable.
Rated input: 5V= =30mA (Headphone) Rated input: 5===300mA (charging case) Tips: When the ice blue indicator flashes while closing the cover, please charge in time.
Indicator Guide
Product operating instructions
- Power on Method I: Take out the headphones from the charging case, and the headphones will turn on automatically. Method 2: Long press MFB for 3 seconds.
- Power off Method 1: Put the headphones into the charging case and close the cover. Method 2: After disconnecting from the Bluetooth device for 3 minutes.
- Pairing Method 1 Take out the headphones from the charging case, the headphones will start pairing automatically. Method 2: Search and click for “Monster Airmars XKTOB Pro’ on the Bluetooth list of the smart device and when the connection is successfully connected” will be heard. * If the distance is exceeded, return to the effective distance within 3 minutes after disconnection. and automatcally connect my device.
Note:
- If the product is not suitable for a long time, it should be fully charged, and ensure that the device is in a shutdown state.
- After charging. please pull out the charging cable to avoid equipment damage caused by long-ume chasing.
Touch key operation
Restore factory settings
Either headphones are not connected to the Bluetooth device when turned on. click the MirEs times to clear the previous pain information and turn it off.
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Precautions
- Headphones will turn on automatically needless to press any outong pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed.
- Charging every 15 days will extend battery life when not in use often, Cleaning off dirt on the charging contacts with cotton swabs with alcohol will maintain good contact for charging.
- Keep the battery (battery pack) away from inflammable or excessive heat such as direct sunlight.
Warnings
- Do not use Heacopones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise, the warranty will be voided
- Keep headphones away from an impact or vibration,
- Do not use any chemical solvents or cleaning agents on the headphones.
