Mr.Coffee-AT13-K-Cafe-Smart-Single-Serve-K-Cup-Pod-Coffee-User-Guide-Feature-Image

Mr. Coffee AT13 K-Cafe Smart Single Serve K-Cup Pod Coffee User Guide

Mr Coffee logo

Mr. Coffee AT13 K-Cafe Smart Single Serve K-Cup Pod Coffee User Guide

Mr.Coffee-AT13-K-Cafe-Smart-Single-Serve-K-Cup-Pod-Coffee-User-Guide-Image-3

IMPORTANT SAFEGUARDS

  1. READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
  2.  Do not touch hot surfaces. Use handles or knobs.
  3.  To protect against electric shock, do not put cord, plugs or coffeemaker in water or any other liquids.
  4.  Close adult supervision is necessary when this appliance is used by or around children.
  5. Unplug from outlet when Home Cafe® coffeemaker is not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.
  6.  The use of accessory attachments that are not MR. COFFEE® HOME CAFE® brand may cause hazards or injuries.
  7.  Do not use outdoors.
  8.  Do not let cord hang over edge of table or counter, or touch hot surfaces.
  9.  Only use water in the water reservoir.
  10. Do not place this appliance on or near a hot gas or electric burner or in a heated oven.

DIAGRAM OF PARTS

Mr.Coffee-AT13-K-Cafe-Smart-Single-Serve-K-Cup-Pod-Coffee-User-Guide-Image-1

  1. Removable 32oz. Water Reservoir
  2.  Water Reservoir Lid
  3.  Coffeemaker Lid
  4. Brew Basket
  5.  Open Button
  6. Adjustable Dispensing Spout
  7. Drip Tray
  8.  Drip Tray Grid
  9.  Base
  10. Rotating Water Reservoir Base
  11. Control Panel
  12. Single-Pod Pod Holder for Coffee Pods or Tea Pods
  13. Double-Pod Pod Holder for Coffee Pods or Tea Pods
  14. Specialty-Pod Pod Holder for Specialty Pods
  15. Home Cafe’® Folgers® Millstone® and Lipton® Pod
  16. Home Cafe’® Folgers® and Millstone® Specialty Pod (for cappuccinos, lattes and other specialty beverages)

HOME CAFE ® COFFEEMAKER FEATURES AND BENEFITS

  • Pressure Brewing Technology: The Home Cafe® coffeemaker is different from your regular coffeemaker because it uses pre-measured sealed coffee pods and unique pressure brewing found in leading coffeehouses. Pressure brewing creates a perfectly balanced cup of coffee by forcing a precise amount of water through the coffee pod consistently producing a high quality single serving of coffee in about a minute.
  •  Variety of Blends, Flavors and Roasts:  Personalize your brewing experience by using a variety of Folgers® and Millstone® coffee pods and Lipton® tea pods.
  •  Specialty Pods Compatible: Your coffeemaker comes with a Specialty Pod Holder for use with Lattes, Cappuccinos, etc. Make sure to keep it in a safe place for future use. Go to www.home-cafe.com
  •  Mug/Cup Size Flexibility: Choose to brew 7 oz., 9 oz. and 14 oz. in your favorite cup, mug or travel mug.
  • Adjustable Brew Strength: Personalize your coffee experience by using one or two pods to achieve a stronger beverage.
  •  Adjustable Dispensing Spout: Adjust the height of the Dispensing Spout and avoid splashing when using shorter cups or mugs i.e.: Specialty or 7 oz. or 9 oz. mug size.
  •  Removable Rotating Water Reservoir: Allows you to brew multiple cups of coffee without refilling the reservoir. Removable for easy cleaning. Rotates to easily fit your counter space.
  •  Removable Pod Holders: For easy use and cleaning.
  •  On/Off Brew Indicator Lights: Lets you know which option you’ve selected when brewing coffee.
  •  Removable Drip Tray & Grid: To fit a taller travel mug and for easy use and cleaning.
  •  Auto–Off: Coffeemaker automatically turns off after each brew.

PREPARING YOUR HOME CAFE ® COFFEEMAKER

BEFORE FIRST USE:

Mr.Coffee-AT13-K-Cafe-Smart-Single-Serve-K-Cup-Pod-Coffee-User-Guide-Image-2

  1. Wash Water Reservoir in warm soapy water. Rinse thoroughly.
  2.  Open the lid by pushing the OPEN Button located on the upper right front of the appliance. Read and remove the yellow insert. Remove and wash Pod Holders and Brew Basket with attached Adjustable Dispensing Spout.
  3.  Replace the above parts and selected pod holder in the coffeemaker and close the lid by pushing down firmly until it locks into place.
  4.  You MUST prime the coffeemaker PRIOR to the very first use. To prime the unit and clean the inside of your coffeemaker:
    •  Fill the Water Reservoir with water. (Picture 1) Press the OPEN Button to open the Coffeemaker Lid. (Picture 2) Read and remove the yellow insert. Insert a Pod Holder without a pod. Plug the unit in. The red STOP Indicator Light will turn on.
    • Place a mug on the coffeemaker large enough to fill 9oz. capacity.
    •  Push the 7 oz. Button and the Specialty Button simultaneously.

CARE AND MAINTENANCE OF YOUR HOME CAFE ® COFFEEMAKER

Regular Cleaning

  1.  Before cleaning, unplug the unit and allow it to cool fully.
  2.  Open the lid by pressing the Open Button.
  3.  Remove the Pod Holder and discard the pod.
  4. Remove the Brew Basket and wash the Brew Basket and Pod Holder with mild detergent.
  5.  Wipe surface with a clean, damp cloth. Do not use abrasive cleaners, as they may scratch the surface.
  6.  Rinse and dry all parts thoroughly. Never immerse the unit/base in water or in any other liquid.

Dishwasher safe (top rack): Removable Pod Holder, Brew Basket, Drip Tray Grid, Drip Tray and Water

Reservoir Lid. Not dishwasher safe: Water Reservoir. Any other servicing should be performed by an authorized service representative.

Decalcifying Your Coffeemaker
Minerals (calcium/limestone) found in water will leave deposits in your coffeemaker and will affect it’s performance. It’s recommended that you regularly remove these deposits by using white household vinegar.

  1.  Remove the Pod Holder.
  2.  Pour 8 oz. white household vinegar into the water reservoir, then add 10-oz. fresh water. Make sure the Brew Basket is in place.
  3.  Set a 14 oz. or larger mug on the brewing plate.
  4.  Press the 9 oz. Brew Button and let the cleaning solution brew through the unit
  5. When the unit stops, empty the mug and return it to the brewing plate.
  6. Press the 9 oz. Brew Button again. Empty the mug and return it to the brewing plate.
  7. Fill the water reservoir up to slightly below the MAX line with fresh, cold water.
  8. Press the 14 oz. Brew Button to flush out the remaining solution. Empty the mug and return it to the brewing plate. Repeat the process until the water reservoir is empty.
  9. Wash the Brew Basket as instructed in the Regular Cleaning Section.

TROUBLESHOOTING

PROBLEMPOSSIBLE CAUSESOLUTION
Coffee tasteThe pod(s) may not have been placed in the pod holder with flat side up.Discard used pod. Place new pod with flat side up.
Damaged pod or regular ground coffee used.Do not use damaged or torn pods. Use only Folgers® and Millstone® pods. Do not use ground coffee.
Water reservoir filled with unfiltered water.Use filtered water for better tasting coffee.
Grounds in coffeeDamaged pod or regular ground coffee used.Use only Do not use damaged or torn pods. Folgers®and Millstone® pods. Do not use ground coffee.
LeakingThe Water reservoir is not properly placed.Secure the Water Reservoir in place.
Mineral deposits have built up in the unit.Follow the “Decalcifying your Coffeemaker” instructions.
Pods inserted incorrectly

or using the wrong pod holder.

Use the correct pod holder for the

# of pods being used, insert pods flat side up and properly placed in the pod holder.

DrippingBrew Basket/Pod holder got clogged up.Clean the Brew Basket and Pod holder.
OverflowingThe pod holder is clogged or too many pods in the pod . holderRed Stop indicator light blinks. Press the Stop Button, allow the coffeemaker to cool down, replace pod with new one and resume brewing.
Unit noisyPump in engaged.The noise you hear is part of the normal function and operation of the coffeemaker.
Water Reservoir is empty.Red Stop indicator light blinks. Press Stop Button and fill the water. Turn the unit on by making your cup size selection.
Red Stop LightWater Reservoir is empty or not properly seatedRed Stop indicator light blinks.

Press the Stop Button and seat

the reservoir properly, refill water reservoir and begin new brew using new pod.

The lid is openRed Stop indicator light blinks.

Press Stop Button. Firmly close the lid before selecting a brew button.

The pod holder is cloggedRed indicator light blinks.

Press Stop Button. Allow the unit to cool down, clean the pod holder and start brewing with a new pod.

REFERENCE LINK

https://www.keurig.com/

Leave a Reply