Serenelife SLFTSP18 Foot Massager User Manual FEATURED img

Serenelife SLFTSP18 Foot Massager User Manual

SERENELIFE LOGO

Serenelife SLFTSP18 Foot Massager User Manual

Serenelife SLFTSP18 Foot Massager User Manual product img

DESCRIPTION

Serenelife SLFTSP18 Foot Massager User Manual fig 1

  1. Housing
  2. Operation mode board
  3. 20 air jets
  4. Acupuncture Ball
  5. Brush massager
  6. Pumice stone
  7. Anti-splash lid
  8. Foot massage rollers
  9. Lifting-up ring
  10. Drain spout

IMPORTANT SAFEGUARDS

  • Please read this instruction manual carefully before use and keep it in a safe place for future reference.
  • Before using this appliance for the first time, always ensure that the voltage on the rating label corresponds to the main voltage in your home.
  • For home use only. Do not use it for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
  • Do not use outdoors.
  • Always unplug the appliance from the power supply before cleaning and when not in use.
  • To prevent the risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately, and get it checked in an authorized service center.
  • Do not take this product to a bathroom or use it in humid conditions.

FEATURES

  • Ergonomic design with massage pegs and cushions for massaging biologically active areas.
  • Regular foot massage improves blood circulation substantially, especially in the feet.
  • The built-in heating element heats the water and maintains a certain temperature during the whole massage procedure.
  • 20 air holes in the massage surface provide a relaxing bubble bath.
  • Bubble function to clean your foot pores.
  • A stronger Vibration function inbuilt to provide a relaxing massage.

LED OPERATION PANEL INSTRUCTION (2)

Serenelife SLFTSP18 Foot Massager User Manual fig 2

POWER BUTTON:
(When you plug the foot-massager in the socket, the power pilot lamp is turned ON, and the LED display is “OFF”) Push the power button one time, and the built-in heating element will start to heat the cool water and LED displays the water temperature-change, (The LED display 108°F three times, then display the actual water temperature (we recommend 108°F as the safe spa – temperature.) Push the Power button once again to stop the foot spa. Always unplug the
massager after foot spa.

TEMP. (TEMPERATURE) BUTTONS:
When you Push the “Power” button one time, the built-in PTC heating element starts to heat the cool water and the LED displays the water temperature change, If the heating lamp is bright, it means that the PTC is working. Pls, keep there is enough water in the tub. Choose to push the 2 buttons (Serenelife SLFTSP18 Foot Massager User Manual fig 3 &Serenelife SLFTSP18 Foot Massager User Manual fig 4

) to control the temperature of the water, LED shows you the temperature in Fahrenheit, 95°F-118°F. (The foot spa massager is with an automatic function, Just check the details in point 6)

BUBBLE & RED-LIGHT BUTTON:
Push this button to switch the bubble and redlight functions. 3 Modes: Bubble & redlight – Bubble – Stop.

THIS FOOT SPA MASSAGER IS DESIGNED WITH AUTOSTART FUNCTION:
Push the power button to start heating the water. When the water temperatures are up to 95°F, it will automatically start the bubble and Red light; When water is heated to 108°F, it will automatically start the Vibration massage.

SPA MASSAGE

  • Place the massager on a steady surface, the special rubber legs will prevent the device from sliding.
  • Ensure that the unit is unplugged before filling it with water.
  • Prior to turning the device ON, pour water into the tub. Fill the foot spa massager with cool or warm water. Do not pour the water over the maximum level mark indicated on the inner wall of the tub.
  • Select one of three massage attachments and place it in the center of the massager.
  • Push the power button ON, and ensure no leaking in the tub.
  • Feel the water temperature first by hand before placing on your feet.
  • Sit down on a chair or other safe place, and place your feet in the spa massager.
  • Push the function buttons of your choice to start the massage function.
  • Choose the vibration button to stimulate feet muscles. The acupressure rollers are designed according to the foot reflexology points, and they can eliminate your fatigue.

SAFE FOOT-SPA:
FIRSTLY POUR ENOUGH WATER (HIGHER THAN THE LOWEST WATER LINE, LOWER THAN THE HIGHEST WATER LINE), SECONDLY PLUG THE DEVICE IN THE SOCKET, AND PUSH THE POWER BUTTON. THEN MAKE SURE THERE IS NO LEAKAGE OF WATER FROM THE TUB. FINALLY, PUT YOUR FEET INSIDE THE TUB TO ENJOY A FOOT SPA MASSAGE.

WARM WATER SPA, VIBRATION & BUBBLE MASSAGE
The bubble function will increase Oxygen to clean your feet. Vibration function promotes blood circulation. If you are pouring cold water, you should wait until the water warms up to a suitable temperature. The heating element will keep the water warm during the whole massage process. Just relax to enjoy the spa massage process.

CLEAN AND CARE

  • Unplug the appliance and ensure that the massager has completely cooled.
  • Do not use hard abrasives or chemistry cleaners.
  • Attachments may be cleaned in soapy water
  • After using, simply rinse out with water. Never immerse the entire unit in water. You can wipe off all surfaces with a cloth damped with water and a mild detergent, then rinse and dry.

STORAGE

  • Be sure that the appliance is unplugged and cooled down.
  • Complete instructions in the section CLEAN AND CARE
  • Keep the appliance in a cool, dry place.

SLFTSP18
Pedicure Spa Foot Massager
Vibrating Heated Foot and Ankle Detox Spa with Red LED Light
and DetachablePedicure Accessories

Features:

  • Portable Foot Massager and Spa with Red LED Lamp
  • Foot Bath with Red LED Light Improves Blood Circulation
  • Massage Rollers Targets Acupuncture Points
  • Strong Vibration Massage Stimulates Feet Muscles
  • Bubble Spa Aerates Warm Water to Release Oxygen
  • Detox and Soften Hard and Calloused Feet and Ankles
  • DetachablePedi Accessories for Ultimate Foot Spa Experience
  • Heated Water Therapy Relaxes Tired and Aching Feet
  • Variable Time Intervals and Different Massage Levels
  • PTC Heating Semiconductor Prevents Overheating
  • Easy to Use: Simple Smart Buttons for Function Choices
  • WideLCD Display to OSD and Modes
  • Top Cover to Protect from Dust and Splash
  • Medical Grade Construction Material
  • Portable: Ergonomic Lift-Up Ring Design
  • Pamper your Feet with a Luxurious Foot Spa Bath!

What’s in the Box:

  • Foot Spa Massage Tub
  • Acupuncture Ball
  • Brush
  • Pumice Stone

Technical Specifications:

  • Construction Material: PP
  • Maximum Support Feet Size: (US Size)Up to 32cm
  • Tank Capacity: 289 Oz

DOWNLOAD LINK

Serenelife SLFTSP18 Foot Massager User Manual

Leave a Reply